[Tex/LaTex] Modifying the section, subsection and subsubsection style

sectioningtikz-pgf

I want to create this style:

enter image description here

I want this executed every time I use the command for the section, subsection and the subsubsection

I already have the code for the graphics, but I do not know how to do all this is done automatically when each command is written, or how to make the format does not move.

anyone can help me to do this??

\documentclass[oneside,spanish,10pt, letterpaper]{memoir}
\usepackage[applemac]{inputenc}
\usepackage{tikz}
\usepackage{anysize}
\marginsize{3cm}{2cm}{2cm}{2cm}
\usepackage[siunitx,european,americanresistors]{circuitikz}
\definecolor{logo}{HTML}{6C17A1}
\definecolor{logo2}{HTML}{FFFF10}
\usepackage{color} 
\def\sectionfont{\sffamily\LARGE}
\begin{document}
\begin{tikzpicture}[remember picture,overlay]
%%%Section
\fill[logo](4,-1) rectangle (0,-2);
\draw[color = logo2] (0.5,-1.7) to[R,o-o,label=\mbox{$R_1=\SI{1.1}{\ohm}$}] (2.5,-1.7);
\node[inner sep=0pt,outer sep=0pt,text=white,scale=1,font=\sectionfont]  at (3.2,-1.5)    {1.1};
\node[inner sep=0pt,outer sep=0pt,text=logo,scale=1,font=\sectionfont]  at (5.5,-1.5)   {Some text};

%%%sub section
\fill[logo](1.2,-3) rectangle (1.7,-4);
\fill[logo](1.2,-3.95) rectangle (14,-4);
\node[inner sep=0pt,outer sep=0pt,text=logo,scale=1,font=\sectionfont]  at (.5,-3.5)  {1.1.1};
\node[inner sep=0pt,outer sep=0pt,text=logo,scale=1.2,font=\sffamily]  at (2.8,-3.5){Some text};
\node[inner sep=0pt,outer sep=0pt,text=logo2,scale=1,font=\sectionfont]  at (1.45,-3.5){$\oint$};
\draw[color = logo] (13.99,-4) node [ground] {};

%%%subsub section
\fill[logo](1.7,-5) rectangle (2.2,-6);
\fill[logo](1.7,-5.95) rectangle (12,-6);
\node[inner sep=0pt,outer sep=0pt,text=logo,scale=1,font=\sectionfont]  at (.9,-5.5){1.1.1.1};
\node[inner sep=0pt,outer sep=0pt,text=logo,scale=1.2,font=\itshape]  at (3.5,-5.5){Some text};
\node[inner sep=0pt,outer sep=0pt,text=logo2,scale=1,font=\sectionfont]  at (1.95,-5.5){$\psi$};
\draw[color = logo] (11.99,-6) node [ground] {};
\end{tikzpicture}
\end{document}

Best Answer

A possible solution using native commands of memoir:

\documentclass[oneside,spanish,10pt, letterpaper]{memoir}
\usepackage[applemac]{inputenc}
\usepackage{tikz}
\usepackage{anysize}
\marginsize{3cm}{2cm}{2cm}{2cm}
\usepackage[siunitx,european,americanresistors]{circuitikz}
\definecolor{logo}{HTML}{6C17A1}
\definecolor{logo2}{HTML}{FFFF10}
\usepackage{color} 
\def\sectionfont{\sffamily\LARGE}

\setcounter{secnumdepth}{4}% to number subsubsections

% SECTIONS
\makeatletter
\setsecheadstyle{\tikz{\fill[logo](4,-1) rectangle (0,-2);
\draw[color = logo2] (0.5,-1.7) to[R,o-o,label=\mbox{$R_1=\SI{1.1}{\ohm}$}] (2.5,-1.7);
\node[inner sep=0pt,outer sep=0pt,text=white,scale=1,font=\sectionfont]  at (3.2,-1.5)    {\thesection};}\vskip-6ex\sectionfont\color{logo}}

\def\@seccntformat#1{\hskip10em}
\makeatother

\setbeforesecskip{-1\onelineskip}
\setaftersecskip{2\onelineskip}

% SUBSECTIONS
\setsubsecheadstyle{\tikz{\fill[logo](1.2,-3) rectangle (1.7,-4);
\fill[logo](1.2,-3.95) rectangle (14,-4);
\node[inner sep=0pt,outer sep=0pt,text=logo,scale=1,font=\sectionfont]  at (.5,-3.5)  {\thesubsection};
\node[inner sep=0pt,outer sep=0pt,text=logo2,scale=1,font=\sectionfont]  at (1.45,-3.5){$\oint$};
\draw[color = logo] (13.99,-4) node [ground] {};}\vskip-9ex\hskip-4em\sffamily\color{logo}
}

\setbeforesubsecskip{-1\onelineskip}
\setaftersubsecskip{3\onelineskip}

% SUBSUBSECTIONS
\setsubsubsecheadstyle{\tikz{\fill[logo](1.7,-5) rectangle (2.2,-6);
\fill[logo](1.7,-5.95) rectangle (12,-6);
\node[inner sep=0pt,outer sep=0pt,text=logo,scale=1,font=\sectionfont]  at (.9,-5.5){\thesubsubsection};
\node[inner sep=0pt,outer sep=0pt,text=logo2,scale=1,font=\sectionfont]  at (1.95,-5.5){$\psi$};
\draw[color = logo] (11.99,-6) node [ground] {};}\vskip-9ex\hskip-3em\sffamily\color{logo}
}

\setbeforesubsubsecskip{-1\onelineskip}
\setaftersubsubsecskip{3\onelineskip}

\usepackage{lipsum}


\begin{document}
\chapter{A chapter title}
\lipsum[1]
\section{Some text}
\lipsum[2]
\subsection{Some text}
\lipsum[3-5]
\subsubsection{Some text}
\lipsum[6]

\chapter{Another chapter title}
\section{Some text}
\subsection{Some text}
\subsubsection{Some text}

\end{document}

The result:

enter image description here

Related Solutions

[Tex/LaTex] How to define the default vertical distance between nodes

I don't really get the question so I hope this is what you wanted. If you include a full document (such that we copy paste and see the problem on our systems) things are much more easier.

Here, you can change the default setting within a scope but your block style had a node distance which was resetting every time it is issued. I've made it 2mm such that we can see the difference easier.

\documentclass[tikz]{standalone}
\usetikzlibrary{arrows,shapes.geometric,positioning}

\begin{document}
\begin{tikzpicture}[decision/.style={diamond, draw, text width=4.5em, text badly centered, node distance=3.5cm, inner sep=0pt},
                    block/.style   ={rectangle, draw, text width=6em, text centered, rounded corners, minimum height=4em, minimum height=2em},
                    cloud/.style   ={draw, ellipse, minimum height=2em},
                    line/.style    ={draw,-latex'},
                    node distance = 1cm, 
                    auto]
    \node [block] (1st) {1st};
    \node [block, right= of 1st]  (2nd1) {2nd1};
\begin{scope}[node distance=2mm and 10mm]%Here we change it for everything inside this scope
    \node [block, above= of 2nd1] (2nd2) {2nd2};
    \node [block, below= of 2nd1] (2nd3) {2nd3};
    \node [block, right= of 2nd1] (3rd1) {3rd1};
    \node [block, above= of 3rd1] (3rd2) {3rd2};
    \node [block, above= of 3rd2] (3rd3) {3rd3};
\end{scope}
    \node [block, below= of 3rd1] (3rd4) {3rd4};
    \node [block, below= of 3rd4] (3rd5) {3rd5};

    \path [line] (1st) -- (2nd1);
    \path [line] (2nd1) -- (2nd2);
    \path [line] (2nd1) -- (2nd3);
    \path [line] (2nd2) -- (3rd3);
    \path [line] (2nd1) -- (3rd1);
    \path [line] (1st) -- (2nd1);
\end{tikzpicture}
\end{document}

enter image description here

[Tex/LaTex] \normalsize for \section, \subsection and \subsubsection

There are two ways to achieve what you are doing (combining my and Torbjørn's comments.)

As a package option

The titlesec package has an option [tiny] which sets all headings (except \chapter) in the text font.

\usepackage[tiny]{titlesec}

In this case you don't need any \titleformat* commands to change the size.

Use `\titleformat*`

There are two versions of the \titleformat command. The short form version (which is what you want here) is in fact \titleformat*; the long form version is \titleformat, which is why you got the error you did, since the command without the * is looking for up to 7 arguments.

\titleformat*{\section}{\normalsize}
\titleformat*{\subsection}{\normalsize}
\titleformat*{\subsubsection}{\normalsize}

Best Answer

Related Solutions

[Tex/LaTex] How to define the default vertical distance between nodes

[Tex/LaTex] \normalsize for \section, \subsection and \subsubsection

As a package option

Use \titleformat*

Related Question

Use `\titleformat*`