[Tex/LaTex] LaTeX scaling tikzpicture does not work

scalingtikz-pgf

The TikZ picture in the following code does not scale correctly. It overlaps with text. If I comment out transform canvas={scale=0.5} then it works correctly (but I would like to scale everything).

\documentclass{article}
\usepackage{subfig}
\usepackage{tikz}
\usepackage{graphicx}


\usetikzlibrary{calc,trees,positioning,arrows,chains,shapes.geometric,
  decorations.pathreplacing,decorations.pathmorphing,shapes,matrix,shapes.symbols}

\tikzset{
  >=stealth',
  punktchain/.style={
    rectangle, 
    rounded corners, 
    % fill=black!10,
    draw=black, very thick,
    text width=8em, 
    minimum height=3em, 
    text centered, 
    on chain},
  line/.style={draw, thick, <-},
  element/.style={
    tape,
    top color=white,
    bottom color=blue!50!black!60!,
    minimum width=7em,
    draw=blue!40!black!90, very thick,
    text width=7em, 
    minimum height=3.5em, 
    text centered, 
    on chain},
  every join/.style={->, thick,shorten >=1pt},
  decoration={brace},
  tuborg/.style={decorate},
  node/.style={scale=0.45},
  tubnode/.style={midway, right=4pt},
}



\newcommand\schema{

  \begin{tikzpicture}[node distance=.8cm, start chain=going below,transform canvas={scale=0.5}]
  %\begin{tikzpicture}[node distance=.8cm, start chain=going below]
    \node (preprocessing) [punktchain ]  {text text};

    \begin{scope}[start branch=venstre,
      every join/.style={->, thick, shorten <=1pt}, ]
      \node[punktchain, on chain=going left, join=by {<-}]
      (landmarks) {
        \begin{tabular}{l}
          text \\
          text \\ 
        \end{tabular}
      };
    \end{scope}

    \node[punktchain, join,] (potentialfunction) {
      \begin{tabular}{l}
        text \\
        text \\ 
      \end{tabular}
    };
    \node[punktchain, join,] (query) {text};
    \begin{scope}[start branch=venstre,
      every join/.style={->, thick, shorten <=1pt}, ]
      \node[punktchain, on chain=going left, join=by {<-}]
      (input) {
        text };
    \end{scope}

    \draw[tuborg, decoration={brace}] let \p1=(preprocessing.north), \p2=(preprocessing.south) in
    ($(1.5, \y1)$) -- ($(1.5, \y2)$) node[tubnode] {
      \begin{tabular}{l}
        text \\
        text \\
      \end{tabular}
    };

    \draw[tuborg, decoration={brace}] let \p1=(potentialfunction.north), \p2=(query.south) in
    ($(1.5, \y1)$) -- ($(1.5, \y2)$) node[tubnode] {
      \begin{tabular}{l}
        text \\
        text \\ 
      \end{tabular}
    };    
  \end{tikzpicture}
}


\begin{document}

\begin{figure}

  \centering
  \subfloat[1 ] {  \schema }
  \hspace{0.5cm}
  \subfloat[2 ] {  \schema }

  \caption{Comparison }  


\end{figure}

\end{document}

Best Answer

transform canvas should usually be the last resort: It makes TikZ lose track of the node positions, so can cause more harm than good.

In your case, a simple scale=0.5 works if you make the nodes scalable as well. By default, TikZ assumes that you don't want to scale nodes, because this will change the text size. You can change this behaviour for a tikzpicture by adding every node/.append style={transform shape}:

Alternatively, you can use \scalebox{0.5}{ \schema }:

Code for first example

\documentclass{article}
\usepackage{subfig}
\usepackage{tikz}
\usepackage{graphicx}


\usetikzlibrary{calc,trees,positioning,arrows,chains,shapes.geometric,
  decorations.pathreplacing,decorations.pathmorphing,shapes,matrix,shapes.symbols}

\tikzset{
  >=stealth',
  punktchain/.style={
    rectangle, 
    rounded corners, 
    % fill=black!10,
    draw=black, very thick,
    text width=8em, 
    minimum height=3em, 
    text centered, 
    on chain},
  line/.style={draw, thick, <-},
  element/.style={
    tape,
    top color=white,
    bottom color=blue!50!black!60!,
    minimum width=7em,
    draw=blue!40!black!90, very thick,
    text width=7em, 
    minimum height=3.5em, 
    text centered, 
    on chain},
  every join/.style={->, thick,shorten >=1pt},
  decoration={brace},
  tuborg/.style={decorate},
  node/.style={scale=0.45},
  tubnode/.style={midway, right=4pt},
}



\newcommand\schema{

  \begin{tikzpicture}[node distance=.8cm, start chain=going below,
  scale=0.5, every node/.append style={transform shape}]
  %\begin{tikzpicture}[node distance=.8cm, start chain=going below]
    \node (preprocessing) [punktchain ]  {text text};

    \begin{scope}[start branch=venstre,
      every join/.style={->, thick, shorten <=1pt}, ]
      \node[punktchain, on chain=going left, join=by {<-}]
      (landmarks) {
        \begin{tabular}{l}
          text \\
          text \\ 
        \end{tabular}
      };
    \end{scope}

    \node[punktchain, join,] (potentialfunction) {
      \begin{tabular}{l}
        text \\
        text \\ 
      \end{tabular}
    };
    \node[punktchain, join,] (query) {text};
    \begin{scope}[start branch=venstre,
      every join/.style={->, thick, shorten <=1pt}, ]
      \node[punktchain, on chain=going left, join=by {<-}]
      (input) {
        text };
    \end{scope}

    \draw[tuborg, decoration={brace}] let \p1=(preprocessing.north), \p2=(preprocessing.south) in
    ($(1.5, \y1)$) -- ($(1.5, \y2)$) node[tubnode] {
      \begin{tabular}{l}
        text \\
        text \\
      \end{tabular}
    };

    \draw[tuborg, decoration={brace}] let \p1=(potentialfunction.north), \p2=(query.south) in
    ($(1.5, \y1)$) -- ($(1.5, \y2)$) node[tubnode] {
      \begin{tabular}{l}
        text \\
        text \\ 
      \end{tabular}
    };    
  \end{tikzpicture}
}


\begin{document}

\begin{figure}

  \centering
  \subfloat[1 ] {  \schema }
  \hspace{0.5cm}
  \subfloat[2 ] {  \schema }

  \caption{Comparison }  


\end{figure}

\end{document}

Code for second example

\documentclass{article}
\usepackage{subfig}
\usepackage{tikz}
\usepackage{graphicx}


\usetikzlibrary{calc,trees,positioning,arrows,chains,shapes.geometric,
  decorations.pathreplacing,decorations.pathmorphing,shapes,matrix,shapes.symbols}

\tikzset{
  >=stealth',
  punktchain/.style={
    rectangle, 
    rounded corners, 
    % fill=black!10,
    draw=black, very thick,
    text width=8em, 
    minimum height=3em, 
    text centered, 
    on chain},
  line/.style={draw, thick, <-},
  element/.style={
    tape,
    top color=white,
    bottom color=blue!50!black!60!,
    minimum width=7em,
    draw=blue!40!black!90, very thick,
    text width=7em, 
    minimum height=3.5em, 
    text centered, 
    on chain},
  every join/.style={->, thick,shorten >=1pt},
  decoration={brace},
  tuborg/.style={decorate},
  node/.style={scale=0.45},
  tubnode/.style={midway, right=4pt},
}



\newcommand\schema{

  \begin{tikzpicture}[node distance=.8cm, start chain=going below]
  %\begin{tikzpicture}[node distance=.8cm, start chain=going below]
    \node (preprocessing) [punktchain ]  {text text};

    \begin{scope}[start branch=venstre,
      every join/.style={->, thick, shorten <=1pt}, ]
      \node[punktchain, on chain=going left, join=by {<-}]
      (landmarks) {
        \begin{tabular}{l}
          text \\
          text \\ 
        \end{tabular}
      };
    \end{scope}

    \node[punktchain, join,] (potentialfunction) {
      \begin{tabular}{l}
        text \\
        text \\ 
      \end{tabular}
    };
    \node[punktchain, join,] (query) {text};
    \begin{scope}[start branch=venstre,
      every join/.style={->, thick, shorten <=1pt}, ]
      \node[punktchain, on chain=going left, join=by {<-}]
      (input) {
        text };
    \end{scope}

    \draw[tuborg, decoration={brace}] let \p1=(preprocessing.north), \p2=(preprocessing.south) in
    ($(1.5, \y1)$) -- ($(1.5, \y2)$) node[tubnode] {
      \begin{tabular}{l}
        text \\
        text \\
      \end{tabular}
    };

    \draw[tuborg, decoration={brace}] let \p1=(potentialfunction.north), \p2=(query.south) in
    ($(1.5, \y1)$) -- ($(1.5, \y2)$) node[tubnode] {
      \begin{tabular}{l}
        text \\
        text \\ 
      \end{tabular}
    };    
  \end{tikzpicture}
}


\begin{document}

\begin{figure}

  \centering
  \subfloat[1 ] {  \scalebox{0.5}{\schema} }
  \hspace{0.5cm}
  \subfloat[2 ] {  \scalebox{0.5}{\schema} }

  \caption{Comparison }  


\end{figure}

\end{document}

Related Solutions

[Tex/LaTex] Rotate a node but not its content: the case of the ellipse decoration

The source of the difficulty is that ellipses are constructed in a particular way in TikZ. They are paths that start from the x-axis and proceed counter-clockwise around their centre. The vast majority of the time, the exact parametrisation doesn't matter. You appear to have found the one situation where it does!

In the actual question, you only want to be able to mirror the ellipse, and so draw it starting from the negative x-axis (the title of the question suggests a more flexible approach). That's actually not too hard since we can exploit the symmetry of the ellipse. The key is to provide it with a negative x-radius, since then it will start from the negative x-axis (and proceed clockwise, but we could correct for that by negating the y-radius as well). To do this, we interrupt the call from the node shape to the drawing command and flip the sign of the x-radius. The simplest way to do this is to redefine the \pgfpathellipse macro to do the negation and then call the original macro. The following code does this.

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{decorations,shapes,decorations.markings}
\makeatletter
\let\origpgfpathellipse=\pgfpathellipse
\def\revpgfpathellipse#1#2#3{%
  #2%
  \pgf@xa=-\pgf@x
  \origpgfpathellipse{#1}{\pgfqpoint{\pgf@xa}{0pt}}{#3}}
\makeatother

\tikzset{
  reversed ellipse/.style={
    ellipse,
    reverse the ellipse%
  },
  reverse the ellipse/.code={
    \let\pgfpathellipse=\revpgfpathellipse
  }
}
\begin{document}
\begin{tikzpicture}
\node[ellipse,
  draw,
  postaction={
    decorate,
    decoration={
      markings,
      mark=at position 1 with {
        \arrow[line width=5pt,blue]{>}
      }
    }
  }
] at (0,0) {hello world};

\node[reversed ellipse,
  draw,
  postaction={
    decorate,
    decoration={
      markings,
      mark=at position 1 with {
        \arrow[line width=5pt,blue]{>}
      }
    }
  }
] at (0,-2) {hello world};
\end{tikzpicture}

\end{document}

Here's the result:

rotated ellipse

(the arrow got clipped, but you can see where it lies)

[Tex/LaTex] How to define the default vertical distance between nodes

I don't really get the question so I hope this is what you wanted. If you include a full document (such that we copy paste and see the problem on our systems) things are much more easier.

Here, you can change the default setting within a scope but your block style had a node distance which was resetting every time it is issued. I've made it 2mm such that we can see the difference easier.

\documentclass[tikz]{standalone}
\usetikzlibrary{arrows,shapes.geometric,positioning}

\begin{document}
\begin{tikzpicture}[decision/.style={diamond, draw, text width=4.5em, text badly centered, node distance=3.5cm, inner sep=0pt},
                    block/.style   ={rectangle, draw, text width=6em, text centered, rounded corners, minimum height=4em, minimum height=2em},
                    cloud/.style   ={draw, ellipse, minimum height=2em},
                    line/.style    ={draw,-latex'},
                    node distance = 1cm, 
                    auto]
    \node [block] (1st) {1st};
    \node [block, right= of 1st]  (2nd1) {2nd1};
\begin{scope}[node distance=2mm and 10mm]%Here we change it for everything inside this scope
    \node [block, above= of 2nd1] (2nd2) {2nd2};
    \node [block, below= of 2nd1] (2nd3) {2nd3};
    \node [block, right= of 2nd1] (3rd1) {3rd1};
    \node [block, above= of 3rd1] (3rd2) {3rd2};
    \node [block, above= of 3rd2] (3rd3) {3rd3};
\end{scope}
    \node [block, below= of 3rd1] (3rd4) {3rd4};
    \node [block, below= of 3rd4] (3rd5) {3rd5};

    \path [line] (1st) -- (2nd1);
    \path [line] (2nd1) -- (2nd2);
    \path [line] (2nd1) -- (2nd3);
    \path [line] (2nd2) -- (3rd3);
    \path [line] (2nd1) -- (3rd1);
    \path [line] (1st) -- (2nd1);
\end{tikzpicture}
\end{document}

enter image description here

Best Answer

Related Solutions

[Tex/LaTex] Rotate a node but not its content: the case of the ellipse decoration

[Tex/LaTex] How to define the default vertical distance between nodes

Related Question