MATLAB: Collection of all the signals by Phased.collector

Phased Array System Toolboxphased.collector

With the help of collector function, we have to give what signal we have to collect and its angle. But can we collect all the available signals near the receiver (direct path signal from transmitter, reflected signals, clutter (in case if we want to model)etc., ) without specifying them?

Best Answer

Yes, the “collector” can be used for all the signals from angles by specifying the second input argument as shown as shown here.

Modulating the waveform is based on the application. If you require long distance ranging, modulation is generally recommended. If the range of interest is a short distance from RADAR platform, modulation would not be as essential.

If you are interested in a few standard Direction of Arrival algorithms, you can use this resource to get started with these operations.

Hope this helps!

Related Solutions

MATLAB: Target angle set up in a radar simulation without phase shifter

You should use tgtang. Note that what you do here is to synthesize the data. Therefore, even though the radar is not steering, you need to know what is the corresponding directional response of the radar toward the target. Therefore you need to use the direction toward the target.

HTH

MATLAB: Collector for Uniform Linear Array

You may be using an older release where the using the class name to do a function call is not supported yet, could you try the followoing?

y = step(collector,x,[45;0])

HTH

Best Answer

Related Solutions

MATLAB: Target angle set up in a radar simulation without phase shifter

MATLAB: Collector for Uniform Linear Array

Related Question