[Tex/LaTex] Subcaption ragged right

subcaption

How do I make the subcaptions ragged right for just one figure environment and not the whole document? I need this for an image grid containing 20 small figures and I am using the \subcaptionbox.

\begin{figure}
\captionsetup[subfigure]{justification=raggedright}
\subcaptionbox*{0,1 s}{\includegraphics[width=1.2in,height=1.2in]{25.png}}\hspace{1em}
\subcaptionbox*{25 s}{\includegraphics[width=1.2in,height=1.2in]{26.png}}\hspace{1em}
\subcaptionbox*{750 s}{\includegraphics[width=1.2in,height=1.2in]{27.png}}\hspace{1em}
\subcaptionbox*{1618,55 s}{\includegraphics[width=1.2in,height=1.2in]{28.png}}\hspace{1em}
\subcaptionbox*{Al}{\includegraphics[width=0.15in,height=1.2in]{29.png}}\\
\subcaptionbox*{0,1 s}{\includegraphics[width=1.2in,height=1.2in]{30.png}}\hspace{1em}
\subcaptionbox*{25 s}{\includegraphics[width=1.2in,height=1.2in]{31.png}}\hspace{1em}
\subcaptionbox*{750 s}{\includegraphics[width=1.2in,height=1.2in]{32.png}}\hspace{1em}
\subcaptionbox*{1618,55 s}{\includegraphics[width=1.2in,height=1.2in]{33.png}}\hspace{1em}
\subcaptionbox*{Re}{\includegraphics[width=0.15in,height=1.2in]{34.png}}\\
\subcaptionbox*{0,1 s}{\includegraphics[width=1.2in,height=1.2in]{35.png}}\hspace{1em}
\subcaptionbox*{25 s}{\includegraphics[width=1.2in,height=1.2in]{36.png}}\hspace{1em}
\subcaptionbox*{750 s}{\includegraphics[width=1.2in,height=1.2in]{37.png}}\hspace{1em}
\subcaptionbox*{1618,55 s}{\includegraphics[width=1.2in,height=1.2in]{38.png}}\hspace{1em}
\subcaptionbox*{Ta}{\includegraphics[width=0.15in,height=1.2in]{39.png}}\\
\subcaptionbox*{0,1 s}{\includegraphics[width=1.2in,height=1.2in]{40.png}}\hspace{1em}
\subcaptionbox*{25 s}{\includegraphics[width=1.2in,height=1.2in]{41.png}}\hspace{1em}
\subcaptionbox*{750 s}{\includegraphics[width=1.2in,height=1.2in]{42.png}}\hspace{1em}
\subcaptionbox*{1618,55 s}{\includegraphics[width=1.2in,height=1.2in]{43.png}}\hspace{1em}
\subcaptionbox*{W [wt\%]}{\includegraphics[width=0.15in,height=1.2in]{44.png}}\\
\end{figure}

Best Answer

Add

\captionsetup[subfigure]{justification=raggedright}

Inside the figure environment. If this is also to apply for short captions spanning just one line singlelinecheck=off has to be added,

\captionsetup[subfigure]{singlelinecheck=off,justification=raggedright}

Related Solutions

[Tex/LaTex] Subcaption in a tabular

I can't reproduce your error. However, you have errors in defining of subfigure. For it you need to declare its width, for example

\begin{subfigure}{0.5\textwidth}\centering

In it you than can set width of figure relative to subfigure width, for example:

\includegraphics[width=\linewidth]{example-image}

Also the \centering should be inside of table environment. Complete code:

\documentclass{article}
\usepackage{graphicx}
\usepackage{subcaption}

\usepackage[active,floats,tightpage]{preview}
    \setlength\PreviewBorder{3em}

    \begin{document}
\begin{table}[ht]
\centering
 \begin{tabular}{cc}
\begin{subfigure}{0.5\textwidth}
  \includegraphics[width=\linewidth]{example-image} \caption{figure} \label{fig:taba2}
\end{subfigure} &
    \begin{subfigure}{0.5\textwidth}
      \includegraphics[width=\linewidth]{example-image} 
    \caption{fd} \label{fig:taba3}
    \end{subfigure}     \\
%
\begin{subfigure}{0.5\textwidth}
  \includegraphics[width=\linewidth]{example-image} \caption{figure}\label{fig:taba4}
\end{subfigure} &
    \begin{subfigure}{0.5\textwidth}
      \includegraphics[width=\linewidth]{example-image} 
    \caption{figure}  \label{fig:taba5}
    \end{subfigure}
 \end{tabular}
 \caption{A table with figures}
   \label{tab:mytable}
\end{table}
    \end{document}

[Tex/LaTex] Labeling subcaption

Since counters are reset to zero, you can't use \refstepcounter to set up the \label. OTOH, you need \refstepcounter for cleverref and hyperref. So I generate the label before \refstepcounter then reset \@currentlabel after.

I see that \subcaption defines skip=6pt, but I can't figure out where skip is used. Also, \caption somehow knows whether it is at the top or bottom. I had to set up \mycaption for bottom only.

\documentclass{article}

\usepackage{graphicx}
\usepackage{caption}
\usepackage{hyperref}

\newcounter{subfig}[figure]

\makeatletter
\newcommand{\mycaption}{\edef\@templabel{Text \thesubfig}%
  \refstepcounter{subfig}%
  \let\@currentlabel=\@templabel% \global?
  \vspace{6pt}%
  \makebox[\textwidth]{\@currentlabel}}
\makeatother

\newcommand{\topanchor}[1]% #1 = counter
  {\refstepcounter{#1}\addtocounter{#1}{-1}\par}

\begin{document}

\section{Section}
\begin{center}
\topanchor{figure}%
\begin{minipage}{0.4\textwidth}
\topanchor{subfig}%
\includegraphics[width=\textwidth]{example-image-a.pdf}
\mycaption
\end{minipage}
\begin{minipage}{0.4\textwidth}
\topanchor{subfig}%
\includegraphics[width=\textwidth]{example-image-b.pdf}
\mycaption\label{here}
\end{minipage}
\captionof{figure}{Description}\label{there}
\end{center}

Look at \ref{here}.

Hyperlink test \ref{there}.
\end{document}

Best Answer

Related Solutions

[Tex/LaTex] Subcaption in a tabular

[Tex/LaTex] Labeling subcaption

Related Question