[Tex/LaTex] scrlayer-scrpage: Footer only on first page, adjust geometry

geometryheader-footerkoma-scriptscrlayer-scrpage

I have a problem during the re-creation of a Word template concerning scrlayer-scrpage and possibly the geometry package inside a KOMA-script document class.

My template has a constant header in the whole document and a footer, but only on the first page. Usually, this is no problem. However, in the original template, the space occupied by the footer on the first page is added to the text area on the following pages. So I need something like includefoot=true inside the geometry definition of the first page and includefoot=false on all following pages.

I hope the following pictures explain what I want to achieve. The current state: on the left, the first page has the footer. On the right, the second page has all the white space where the empty footer is.

I want to add the footer space for every page from page 2 to the end as shown on the right:

Unfortunately, I only achieve the desired result for page 2 and forward for includefoot=false which messes up the footer on the first page. I tried to use newgeometry after my title section, but as explained in this thread this works on full pages and my first section is moved to the second page. I do not want that.

Is there a possibility to switch geometry definitions without jumping to a new page or anything else that solves my problem?

MWE

\documentclass[listof=totoc,bibliography=totoc,parskip=half-,11pt]{scrartcl}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Preamble                         %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% ---------------------------
% Packages
% ---------------------------

\usepackage{anyfontsize}
\usepackage[english]{babel}
\usepackage{blindtext}
\usepackage{coffee4}
\usepackage{geometry}
\usepackage{tabularx}
\usepackage[autooneside]{scrlayer-scrpage}

% Page geometry
\geometry{
  left=25mm,
  right=20mm,
  top=25mm,
  bottom=12mm,
  includefoot=true,
  headsep = \dimexpr2\baselineskip\relax,
  footskip = \dimexpr1\baselineskip+1.5mm\relax,
}

% ---------------------------
% Template adjustments
% ---------------------------

% Title
\makeatletter
\def\@maketitle{%
  \newpage
  % Zweck
  \begingroup%
    \normalsize%
    \bfseries%
    Test
    \par
  \endgroup%
  % Abstand
  \vskip 2\baselineskip
  % Authors
  \begingroup%
    \normalsize%
    \bfseries%
    \begin{tabularx}{\linewidth}{@{}X}%
      \@author
    \end{tabularx}
    \par
  \endgroup%
  % Abstand
  \vskip 1\baselineskip
  % Title
  \begingroup%
    \normalsize
    \bfseries
    \@title%
    \par%
  \endgroup%
  % Abstand
  \vskip 1\baselineskip
  \rule{\textwidth}{0.4pt}%
  %\vskip 1.5em%
  \vskip 1\baselineskip
  % Beschreibung des Vorhabens
  \begingroup%
    \normalsize
    \bfseries
    Schalala
    \par%
  \endgroup%
  \vskip 2\baselineskip
}
\makeatother

% Font sizes
\setkomafont{section}{\normalsize\bfseries}
\setkomafont{subsection}{\normalsize\bfseries}
\setkomafont{subsubsection}{\normalsize\bfseries}
\setkomafont{paragraph}{\normalsize\bfseries}
\setkomafont{subparagraph}{\normalsize\bfseries}

% ---------------------------
% Header/Footer commands
% ---------------------------

% Clear old  headers/footers
\clearpairofpagestyles

% Fonts for headers/footers
\setkomafont{pageheadfoot}{\sffamily\footnotesize}
\setkomafont{pagehead}{\sffamily}
\setkomafont{pagination}{}

% Trennlinien fuer Kopf und Fuss
\KOMAoptions{
  headsepline = false,
  footsepline = false,
  plainfootsepline = false,
}

% Create new header for title page
\newpairofpagestyles{firstpage}{%
  \ihead{Inner head}
  \ohead{Outer head}
  \ifoot{
    \begin{tabular}[t]{@{}l}
    \textbf{An organization}\\
    With an address\\
    and communication channels
    \end{tabular}
  }
  \cfoot{Footer on 1\textsuperscript{st} page only}
  \ofoot{\fontsize{37}{44}\selectfont XYZ}
}
% Page Layout for normal pages
\newpairofpagestyles{normalpage}{%
  \ihead{Inner head}
  \ohead{Outer head}
  \ifoot{}
  \ofoot{}
}

% Abstaende
\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{section}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subsection}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subsubsection}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{paragraph}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subparagraph}

% 
\setlength{\parskip}{0cm}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Title and author                 %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\title{Title}
\author{Author}
\date{\today}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Document                         %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{document}

\maketitle
\thispagestyle{firstpage}
\pagestyle{normalpage}

\section{First section}

\subsection{Subsection 1}

\Blindtext[2]

\subsection{Subsection 2}

\Blindtext[6]

\section{Second section}

\cofeAm{1}{0.85}{0}{0.25\textwidth}{-0.25\textheight} % needs \usepackage{coffee4}
\Blindtext[9]
\cofeDm{0.5}{0.2}{0}{-0.35\textwidth}{-0.4\textheight} % needs \usepackage{coffee4}

\end{document}

Update

using the approach proposed by @UlrikeFischer:

\documentclass[listof=totoc,bibliography=totoc,parskip=half-,11pt]{scrartcl}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Preamble                         %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% ---------------------------
% Packages
% ---------------------------

\usepackage{anyfontsize}
\usepackage[english]{babel}
\usepackage{blindtext}
\usepackage{coffee4}
\usepackage{geometry}
\usepackage{tabularx}
\usepackage[autooneside]{scrlayer-scrpage}

% Page geometry
\geometry{
  left=25mm,
  right=20mm,
  top=25mm,
  %bottom=20mm,
  %includefoot=true,
  bottom=12mm,
  includefoot=false,
  headsep = \dimexpr2\baselineskip\relax,
  footskip = \dimexpr1\baselineskip+1.5mm\relax,
}

% ---------------------------
% Template adjustments
% ---------------------------

% Title
\makeatletter
\def\@maketitle{%
  \newpage
  % Zweck
  \begingroup%
    \normalsize%
    \bfseries%
    Test
    \par
  \endgroup%
  % Abstand
  \vskip 2\baselineskip
  % Authors
  \begingroup%
    \normalsize%
    \bfseries%
    \begin{tabularx}{\linewidth}{@{}X}%
      \@author
    \end{tabularx}
    \par
  \endgroup%
  % Abstand
  \vskip 1\baselineskip
  % Title
  \begingroup%
    \normalsize
    \bfseries
    \@title%
    \par%
  \endgroup%
  % Abstand
  \vskip 1\baselineskip
  \rule{\textwidth}{0.4pt}%
  %\vskip 1.5em%
  \vskip 1\baselineskip
  % Beschreibung des Vorhabens
  \begingroup%
    \normalsize
    \bfseries
    Schalala
    \par%
  \endgroup%
  \vskip 2\baselineskip
}
\makeatother

% Font sizes
\setkomafont{section}{\normalsize\bfseries}
\setkomafont{subsection}{\normalsize\bfseries}
\setkomafont{subsubsection}{\normalsize\bfseries}
\setkomafont{paragraph}{\normalsize\bfseries}
\setkomafont{subparagraph}{\normalsize\bfseries}

% ---------------------------
% Header/Footer commands
% ---------------------------

% Clear old  headers/footers
\clearpairofpagestyles

% Fonts for headers/footers
\setkomafont{pageheadfoot}{\sffamily\footnotesize}
\setkomafont{pagehead}{\sffamily}
\setkomafont{pagination}{}

% Trennlinien fuer Kopf und Fuss
\KOMAoptions{
  headsepline = false,
  footsepline = false,
  plainfootsepline = false,
}

% Create new header for title page
\newpairofpagestyles{firstpage}{%
  \ihead{Inner head}
  \ohead{Outer head}
  \ifoot{
    \raisebox{1cm}[0pt][0pt]{%
      \begin{tabular}[t]{@{}l}
      \textbf{An organization}\\
      With an address\\
      and communication channels
      \end{tabular}
    }
  }
  \cfoot{
    \raisebox{1cm}[0pt][0pt]{%
      Footer on 1\textsuperscript{st} page only
    }
  }
  \ofoot{
    \raisebox{1cm}[0pt][0pt]{%
      {\fontsize{37}{44}\selectfont XYZ}
      %\normalsize
    }
  }
}
% Page Layout for normal pages
\newpairofpagestyles{normalpage}{%
  \ihead{Inner head}
  \ohead{Outer head}
  \ifoot{}
  \ofoot{}
}

% Abstaende
\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{section}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subsection}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subsubsection}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{paragraph}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subparagraph}

% 
\setlength{\parskip}{0cm}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Title and author                 %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\title{Title}
\author{Author}
\date{\today}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Document                         %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{document}

\maketitle
\enlargethispage{-1cm}
\thispagestyle{firstpage}
\pagestyle{normalpage}

\section{First section}

\subsection{Subsection 1}

\Blindtext[2]

\subsection{Subsection 2}

\Blindtext[6]

\section{Second section}

\Blindtext[9]

\end{document}

What happens with the \ofoot?

Best Answer

Based on your update you simple need to change your command \raisebox{1cm}[0pt][0pt] in command \ofoot to for example \raisebox{0cm}[0pt][0pt]. Please see that I changed the first parameter 1cm to 0cm.

With the complete MWE

\documentclass[%
  listof=totoc,
  bibliography=totoc,
  parskip=half-,
  11pt
]{scrartcl}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Preamble                         %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% ---------------------------
% Packages
% ---------------------------

\usepackage{anyfontsize}
\usepackage[english]{babel}
\usepackage{blindtext}
%\usepackage{coffee4}
\usepackage{geometry}
\usepackage{tabularx}
\usepackage[autooneside]{scrlayer-scrpage}

% Page geometry
\geometry{
  left=25mm,
  right=20mm,
  top=25mm,
  bottom=12mm,
  includefoot=false,
  headsep = \dimexpr2\baselineskip\relax,
  footskip = \dimexpr1\baselineskip+1.5mm\relax,
}

% ---------------------------
% Template adjustments
% ---------------------------

% Title
\makeatletter
\def\@maketitle{%
  \newpage
  % Zweck
  \begingroup%
    \normalsize%
    \bfseries%
    Test
    \par
  \endgroup%
  % Abstand
  \vskip 2\baselineskip
  % Authors
  \begingroup%
    \normalsize%
    \bfseries%
    \begin{tabularx}{\linewidth}{@{}X}%
      \@author
    \end{tabularx}
    \par
  \endgroup%
  % Abstand
  \vskip 1\baselineskip
  % Title
  \begingroup%
    \normalsize
    \bfseries
    \@title%
    \par%
  \endgroup%
  % Abstand
  \vskip 1\baselineskip
  \rule{\textwidth}{0.4pt}%
  %\vskip 1.5em%
  \vskip 1\baselineskip
  % Beschreibung des Vorhabens
  \begingroup%
    \normalsize
    \bfseries
    Schalala
    \par%
  \endgroup%
  \vskip 2\baselineskip
}
\makeatother

% Font sizes
\setkomafont{section}{\normalsize\bfseries}
\setkomafont{subsection}{\normalsize\bfseries}
\setkomafont{subsubsection}{\normalsize\bfseries}
\setkomafont{paragraph}{\normalsize\bfseries}
\setkomafont{subparagraph}{\normalsize\bfseries}

% ---------------------------
% Header/Footer commands
% ---------------------------

% Clear old  headers/footers
\clearpairofpagestyles

% Fonts for headers/footers
\setkomafont{pageheadfoot}{\sffamily\footnotesize}
\setkomafont{pagehead}{\sffamily}
\setkomafont{pagination}{}

% Trennlinien fuer Kopf und Fuss
\KOMAoptions{
  headsepline = false,
  footsepline = false,
  plainfootsepline = false,
}

% Create new header for title page
\newpairofpagestyles{firstpage}{%
  \ihead{Inner head}
  \ohead{Outer head}
  \ifoot{
    \raisebox{1cm}[0pt][0pt]{%
      \begin{tabular}[t]{@{}l}
      \textbf{An organization}\\
      With an address\\
      and communication channels
      \end{tabular}
    }
  }
  \cfoot{
    \raisebox{1cm}[0pt][0pt]{%
      Footer on 1\textsuperscript{st} page only
    }
  }
  \ofoot{
    \raisebox{0cm}[0pt][0pt]{%  <=======================================
      {\fontsize{37}{44}\selectfont XYZ}
      %\normalsize
    }
  }
}
% Page Layout for normal pages
\newpairofpagestyles{normalpage}{%
  \ihead{Inner head}
  \ohead{Outer head}
  \ifoot{}
  \ofoot{}
}

% Abstaende
\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{section}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subsection}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subsubsection}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{paragraph}

\RedeclareSectionCommand[
  beforeskip=1\baselineskip,
  afterskip=1\baselineskip
]{subparagraph}

% 
\setlength{\parskip}{0cm}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Title and author                 %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\title{Title}
\author{Author}
\date{\today}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Document                         %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{document}

\maketitle
\enlargethispage{-1cm}
\thispagestyle{firstpage}
\pagestyle{normalpage}

\section{First section}

\subsection{Subsection 1}

\Blindtext[2]

\subsection{Subsection 2}

\Blindtext[6]

\section{Second section}

\Blindtext[9]

\end{document}

you will get the wished result:

Related Solutions

[Tex/LaTex] Problems with scrlayer-scrpage

This translates your page layout into KOMA's terms. It may not make the requested changes because I don't know what they are meant to be. Your example does not include any chapters, let alone chapter titles, and it is impossible to guess which distance you are talking about or what is meant to align with what.

Note that, as originally configured, your layout will be inconsistent because both fancyhdr and scrlayer-scrpage will adjust headheight as required, changing the page dimensions in unpredictable ways. To avoid this, you need to make the height at least 33pt and to tell geometry about it.

Note also that scrlayer-scrpage is designed to cooperate with typearea. By using geometry, you lose the advantages of this. Consider whether you could use KOMA's typearea instead.

Here's the initial translation:

\documentclass[12pt,headsepline,footsepline]{scrreprt}
\renewcommand{\familydefault}{\sfdefault}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{geometry}% do you really need this? Better to use KOMA's setup if possible
\geometry{verbose,tmargin=2cm,bmargin=3.5cm,lmargin=3cm,rmargin=2.5cm,headheight=33pt}% the value 33pt is obtained from console warnings output by scrlayer-scrpage - this is the minimum required value, given the inclusion of the graphic - again, it would be better if you could use typearea for this
\usepackage[demo]{graphicx}
\usepackage{xcolor}
\definecolor{mygreen}{RGB}{23,156,125}
\usepackage{scrlayer-scrpage}
\setkomafont{pageheadfoot}{\upshape}
\setkomafont{pagehead}{\slshape}
\setkomafont{headsepline}{\color{mygreen}}
\setkomafont{footsepline}{\color{mygreen}}
\pagestyle{scrheadings}
\automark{chapter}
\ihead{\leftmark}
\ohead{\includegraphics[height=1cm]{IMG/Logo.JPG}}
\ofoot{\thepage}
\cfoot{}
\chead{}

\begin{document}
    Hello
\end{document}

I am guessing that you want the same footer on plain pages as on other pages. This can be achieved using the starred versions of \cfoot and \ofoot, and adding plainfootsepline to the class options:

\documentclass[12pt,headsepline,footsepline,plainfootsepline]{scrreprt}
\renewcommand{\familydefault}{\sfdefault}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{geometry}% do you really need this? Better to use KOMA's setup if possible
\geometry{verbose,tmargin=2cm,bmargin=3.5cm,lmargin=3cm,rmargin=2.5cm,headheight=33pt}% the value 33pt is obtained from console warnings output by scrlayer-scrpage - this is the minimum required value, given the inclusion of the graphic - again, it would be better if you could use typearea for this
\usepackage[demo]{graphicx}
\usepackage{xcolor}
\definecolor{mygreen}{RGB}{23,156,125}
\usepackage{scrlayer-scrpage,kantlipsum}
\setkomafont{pageheadfoot}{\upshape}
\setkomafont{pagehead}{\slshape}
\setkomafont{headsepline}{\color{mygreen}}
\setkomafont{footsepline}{\color{mygreen}}
\pagestyle{scrheadings}
\automark{chapter}
\ihead{\leftmark}
\ohead{\includegraphics[height=1cm]{IMG/Logo.JPG}}
\ofoot*{\thepage}
\cfoot*{}
\chead{}
\begin{document}
    Hello
    \chapter{Some chapter}
    \kant[1-10]
\end{document}

I'm guessing that the further change you want concerns the alignment of the \leftmark in the header. I'm not sure how this constitutes 2 changes, mind, since aligning with the bottom of the image will also reduce the distance....

So, I'm guessing you want something like this:

In which case, it is easiest, I think, to simply define the header in one go, setting the other parts of the header empty:

\documentclass[12pt,headsepline,footsepline,plainfootsepline]{scrreprt}
\renewcommand{\familydefault}{\sfdefault}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{geometry}% do you really need this? Better to use KOMA's setup if possible
\geometry{verbose,tmargin=2cm,bmargin=3.5cm,lmargin=3cm,rmargin=2.5cm,headheight=33pt}% the value 33pt is obtained from console warnings output by scrlayer-scrpage - this is the minimum required value, given the inclusion of the graphic - again, it would be better if you could use typearea for this
\usepackage{graphicx}
\usepackage{xcolor,calc}
\definecolor{mygreen}{RGB}{23,156,125}
\usepackage[markcase=upper]{scrlayer-scrpage}
\usepackage{kantlipsum}
\setkomafont{pageheadfoot}{\upshape}
\setkomafont{pagehead}{\slshape}
\setkomafont{headsepline}{\color{mygreen}}
\setkomafont{footsepline}{\color{mygreen}}
\pagestyle{scrheadings}
\automark{chapter}
\ihead{\leftmark\hfill \includegraphics[height=1cm]{example-image-a}}
\ohead{}
\chead{}
\ofoot*{\thepage}
\cfoot*{}
\chead{}
\begin{document}
    Hello
    \chapter{Some chapter}
    \kant[1-10]
\end{document}

EDIT

In response to the question concerning changing the headers, you can simply redefine \ihead (or \ihead*) as you wish. Do note, however, that doing so is likely to be confusing to readers. The point of running heads is that they contain information which is consistent throughout the document (except on special pages such as the first pages of chapters etc.). Also, the headers should not distract from the body of the document.

\ihead{\includegraphics[height=1cm]{example-image-b}\hfill\includegraphics[height=1cm]{example-image-a}}
\kant[11-14]
\ihead{\leftmark\hfill \includegraphics[height=1cm]{example-image-a}}
\kant[15-20]

EDIT EDIT

You can produce roughly the same page layout using typearea by commenting out the calls to geometry and adding

\areaset[5mm]{155mm}{272mm}

However, if you are stuck with a requirement to use precisely the dimensions given, then you may need to stick to geometry even though it does not cooperate with KOMA. You need to be a bit more careful to make sure you specify adequate headheight etc. in that case.

[Tex/LaTex] Increasing \footheight with scrlayer-scrpage

\footheight is total height of the foot, including height (space above the baseline) and depth (space below the baseline) of the foot.

Your rule starts on the baseline. So the height of the foot must be at least the height of your rule plus the depth of a \strutbox. Therefore scrlayer-scrpage enlarges the former \footheight by \dp\strutbox. On the next page your rule starts again on the baseline and so scrlayer-scrpage enlarges the\footheight from the last page by \dp\strutbox again ...

You can shift the rule down by \dp\strutbox:

\documentclass{scrartcl}
\usepackage[headsepline]{scrlayer-scrpage}

\ifoot*{\the\footheight\quad\rule[-\dp\strutbox]{2px}{\footheight}}

\usepackage{lipsum}
\begin{document}
\lipsum[1-40]
\end{document}

Or you have to shorten the rule \dp\strutbox

\documentclass{scrartcl}
\usepackage[headsepline]{scrlayer-scrpage}

\ifoot*{\the\footheight\quad\rule{2px}{\dimexpr\footheight-\dp\strutbox\relax}}

\usepackage{lipsum}
\begin{document}
\lipsum[1-40]
\end{document}

Or you can hide the height of the rule using \smash

\documentclass{scrartcl}
\usepackage[headsepline]{scrlayer-scrpage}

\ifoot*{\the\footheight\quad\smash{\rule{2px}{\footheight}}}

\usepackage{lipsum}
\begin{document}
\lipsum[1-40]
\end{document}

Note that

\ifoot*{\the\footheight\quad\rule[-\dp\strutbox]{2px}{\footheight}}

is a short version of

\ifoot
  [{\the\footheight\quad\rule[-\dp\strutbox]{2px}{\footheight}}]
   {\the\footheight\quad\rule[-\dp\strutbox]{2px}{\footheight}}

MWE