[Tex/LaTex] Adding a legend entry to a plot

tikz-pgf

In the following figure I want to add as legend in the figure

\ldots: st. 1

___: st. 2

Please help me.

\begin{figure*}[htp]
{\tiny
  \centering 
  \subfloat[$U(0.5)  $]{
  \begin{tikzpicture}[scale=0.70,transform shape]
    \draw (0,30*0.84) -- (5*1,30*0.84);
\draw (0,30*1.0) -- (5,30*1.0);
\draw (0,30*0.84)-- (0,30*1.0);
\draw (5,30*0.84)-- (5,30*1.0);
\draw (2.5,3*8.6-1.8)node{\large{$p\rightarrow$}};
\draw (-0.5-0.8,28.5)node{\large{$\uparrow$}};
\draw (-0.5-0.8,28)node{\large{$\delta$}};
\draw (0,26.8-2.0) node{0};
\draw (5*0.2,26.6-2) node{0.2};
\draw (5*0.2,26.8-1.8)--(5*0.2,26.8+0.4-1.8);
\draw (5*0.4,26.6-2) node{0.4};
\draw (5*0.4,26.8-1.8)--(5*0.4,26.8+0.4-1.8);
\draw (5*0.6,26.6-2) node{0.6};
\draw (5*0.6,26.8-1.8)--(5*0.6,26.8+0.4-1.8);
\draw (5*0.8,26.6-2) node{0.8};
\draw (5*0.8,26.8-1.8)--(5*0.8,26.8+0.4-1.8);
\draw (5*1.0,26.6-2) node{1.0};
%\draw (5*0.0-0.6,27.0-3) node{0.9};
%\draw (5*0.0-0.2,27.0)--(5*0.0+0.2,27.0);
%\draw (5*0.0-0.6,30*0.92-3) node{0.82};
%\draw (5*0.0-0.2,30*0.92-3)--(5*0.0+0.2,30*0.92-3);
\draw (5*0.0-0.6,30*0.94-3) node{0.84};
%\draw (5*0.0-0.2,30*0.94-3)--(5*0.0+0.2,30*0.94-3);
\draw (5*0.0-0.6,30*0.96-3) node{0.86};
\draw (5*0.0-0.2,30*0.96-3)--(5*0.0+0.2,30*0.96-3);
\draw (5*0.0-0.6,30*0.98-3) node{0.88};
\draw (5*0.0-0.2,30*0.98-3)--(5*0.0+0.2,30*0.98-3);
\draw (5*0.0-0.6,30*1.0-3) node{0.90};
\draw (5*0.0-0.2,30*1.00-3)--(5*0.0+0.2,30*1.00-3);
\draw (5*0.0-0.6,30*1.02 -3) node{0.92};
\draw (5*0.0-0.2,30*1.02-3)--(5*0.0+0.2,30*1.02-3);
\draw (5*0.0-0.6,30*1.04 -3) node{0.94};
\draw (5*0.0-0.2,30*1.04-3)--(5*0.0+0.2,30*1.04-3);
\draw (5*0.0-0.6,30*1.06 -3) node{0.96};
\draw (5*0.0-0.2,30*1.06-3)--(5*0.0+0.2,30*1.06-3);
\draw (5*0.0-0.6,30*1.08 -3) node{0.98};
\draw (5*0.0-0.2,30*1.08-3)--(5*0.0+0.2,30*1.08-3);
\draw (5*0.0-0.6,30*1.08+30*0.02 -3) node{1.00};
%\draw (5*0.0-0.2,30*1.08+30*0.02-3)--(5*0.0+0.2,30*1.08+30*0.02-3);

\draw[dotted](0.000000,27.213000)--(0.050000,27.271800)--(0.100000,27.403200)--(0.150000,27.286800)--(0.200000,27.270000)--(0.250000,27.396600)--(0.300000,27.445200)--(0.350000,27.395400)--(0.400000,27.491400)--(0.450000,27.558600)--(0.500000,27.593400)--(0.550000,27.642600)--(0.600000,27.593400)--(0.650000,27.645600)--(0.700000,27.601800)--(0.750000,27.756000)--(0.800000,27.772200)--(0.850000,27.815400)--(0.900000,27.832200)--(0.950000,27.785400)--(1.000000,27.897600)--(1.050000,28.033200)--(1.100000,28.022400)--(1.150000,27.937800)--(1.200000,28.015200)--(1.250000,28.065000)--(1.300000,28.057200)--(1.350000,28.114800)--(1.400000,28.057200)--(1.450000,28.150800)--(1.500000,28.200000)--(1.550000,28.152000)--(1.600000,28.206600)--(1.650000,28.246200)--(1.700000,28.246200)--(1.750000,28.264200)--(1.800000,28.393800)--(1.850000,28.347600)--(1.900000,28.317000)--(1.950000,28.417200)--(2.000000,28.447200)--(2.050000,28.464600)--(2.100000,28.440000)--(2.150000,28.483800)--(2.200000,28.481400)--(2.250000,28.524000)-
-(2.300000,28.584600)--(2.350000,28.576200)--(2.400000,28.572600)--(2.450000,28.646400)--(2.500000,28.604400)--(2.550000,28.718400)--(2.600000,28.684200)--(2.650000,28.727400)--(2.700000,28.774200)--(2.750000,28.805400)--(2.800000,28.812600)--(2.850000,28.783800)--(2.900000,28.809600)--(2.950000,28.875600)--(3.000000,28.821600)--(3.050000,28.910400)--(3.100000,28.905600)--(3.150000,28.886400)--(3.200000,28.953600)--(3.250000,29.024400)--(3.300000,29.046600)--(3.350000,29.072400)--(3.400000,29.064600)--(3.450000,29.053800)--(3.500000,29.062200)--(3.550000,29.098800)--(3.600000,29.151000)--(3.650000,29.130000)--(3.700000,29.157600)--(3.750000,29.173200)--(3.800000,29.223600)--(3.850000,29.190000)--(3.900000,29.168400)--(3.950000,29.278200)--(4.000000,29.243400)--(4.050000,29.319600)--(4.100000,29.318400)--(4.150000,29.319000)--(4.200000,29.350200)--(4.250000,29.377800)--(4.300000,29.402400)--(4.350000,29.380800)--(4.400000,29.385600)--(4.450000,29.393400)--(4.500000,29.410800)--(4.550000,29.469000)--(4.600000,
29.451600)--(4.650000,29.487000)--(4.700000,29.490600)--(4.750000,29.547600)--(4.800000,29.556000)--(4.850000,29.553000)--(4.900000,29.567400)--(4.950000,29.586000)--(5.000000,29.558400);

\draw[black](0.000000,27.258600)--(0.050000,27.285000)--(0.100000,27.309600)--(0.150000,27.370800)--(0.200000,27.468600)--(0.250000,27.417600)--(0.300000,27.533400)--(0.350000,27.564000)--(0.400000,27.643800)--(0.450000,27.719400)--(0.500000,27.699000)--(0.550000,27.803400)--(0.600000,27.756600)--(0.650000,27.845400)--(0.700000,27.796200)--(0.750000,27.867600)--(0.800000,27.967800)--(0.850000,27.989400)--(0.900000,28.036200)--(0.950000,28.023000)--(1.000000,28.137000)--(1.050000,28.153800)--(1.100000,28.159200)--(1.150000,28.160400)--(1.200000,28.254000)--(1.250000,28.348800)--(1.300000,28.344000)--(1.350000,28.408200)--(1.400000,28.384800)--(1.450000,28.336800)--(1.500000,28.423800)--(1.550000,28.405200)--(1.600000,28.572000)--(1.650000,28.556400)--(1.700000,28.540800)--(1.750000,28.571400)--(1.800000,28.649400)--(1.850000,28.629000)--(1.900000,28.648800)--(1.950000,28.671600)--(2.000000,28.682400)--(2.050000,28.703400)--(2.100000,28.755000)--(2.150000,28.761000)--(2.200000,28.789800)--(2.250000,28.803600)--
(2.300000,28.798200)--(2.350000,28.861800)--(2.400000,28.911000)--(2.450000,28.933800)--(2.500000,28.946400)--(2.550000,28.995000)--(2.600000,28.963800)--(2.650000,28.984200)--(2.700000,29.019000)--(2.750000,28.983000)--(2.800000,29.048400)--(2.850000,29.046000)--(2.900000,29.091000)--(2.950000,29.081400)--(3.000000,29.128800)--(3.050000,29.142000)--(3.100000,29.175600)--(3.150000,29.137200)--(3.200000,29.160000)--(3.250000,29.180400)--(3.300000,29.222400)--(3.350000,29.279400)--(3.400000,29.225400)--(3.450000,29.253000)--(3.500000,29.287800)--(3.550000,29.290200)--(3.600000,29.309400)--(3.650000,29.324400)--(3.700000,29.359200)--(3.750000,29.334600)--(3.800000,29.349000)--(3.850000,29.379000)--(3.900000,29.381400)--(3.950000,29.367000)--(4.000000,29.375400)--(4.050000,29.434200)--(4.100000,29.407800)--(4.150000,29.446800)--(4.200000,29.400000)--(4.250000,29.436000)--(4.300000,29.485800)--(4.350000,29.457600)--(4.400000,29.544000)--(4.450000,29.488800)--(4.500000,29.521800)--(4.550000,29.532000)--(4.600000,
29.498400)--(4.650000,29.520000)--(4.700000,29.560200)--(4.750000,29.545200)--(4.800000,29.543400)--(4.850000,29.589600)--(4.900000,29.593800)--(4.950000,29.587800)--(5.000000,29.572800);

\end{tikzpicture}
 \label{fig0}}
}
\end{figure*}

Best Answer

Use pgfplots package for such plots.

\documentclass[10pt]{article}
\usepackage{pgfplots}

\begin{document}
\begin{tikzpicture}
\begin{axis}[ylabel=$\delta$,xlabel=$p$,
x filter/.code={\pgfmathdivide{#1}{5.0}},
y filter/.code={\pgfmathdivide{#1}{29.593800}},
legend pos=south east]
\addplot[no marks,dotted] coordinates {(0.000000,27.213000) (0.050000,27.271800) (0.100000,27.403200) (0.150000,27.286800) (0.200000,27.270000) (0.250000,27.396600) (0.300000,27.445200) (0.350000,27.395400) (0.400000,27.491400) (0.450000,27.558600) (0.500000,27.593400) (0.550000,27.642600) (0.600000,27.593400) (0.650000,27.645600) (0.700000,27.601800) (0.750000,27.756000) (0.800000,27.772200) (0.850000,27.815400) (0.900000,27.832200) (0.950000,27.785400) (1.000000,27.897600) (1.050000,28.033200) (1.100000,28.022400) (1.150000,27.937800) (1.200000,28.015200) (1.250000,28.065000) (1.300000,28.057200) (1.350000,28.114800) (1.400000,28.057200) (1.450000,28.150800) (1.500000,28.200000) (1.550000,28.152000) (1.600000,28.206600) (1.650000,28.246200) (1.700000,28.246200) (1.750000,28.264200) (1.800000,28.393800) (1.850000,28.347600) (1.900000,28.317000) (1.950000,28.417200) (2.000000,28.447200) (2.050000,28.464600) (2.100000,28.440000) (2.150000,28.483800) (2.200000,28.481400) (2.250000,28.524000)
(2.300000,28.584600) (2.350000,28.576200) (2.400000,28.572600) (2.450000,28.646400) (2.500000,28.604400) (2.550000,28.718400) (2.600000,28.684200) (2.650000,28.727400) (2.700000,28.774200) (2.750000,28.805400) (2.800000,28.812600) (2.850000,28.783800) (2.900000,28.809600) (2.950000,28.875600) (3.000000,28.821600) (3.050000,28.910400) (3.100000,28.905600) (3.150000,28.886400) (3.200000,28.953600) (3.250000,29.024400) (3.300000,29.046600) (3.350000,29.072400) (3.400000,29.064600) (3.450000,29.053800) (3.500000,29.062200) (3.550000,29.098800) (3.600000,29.151000) (3.650000,29.130000) (3.700000,29.157600) (3.750000,29.173200) (3.800000,29.223600) (3.850000,29.190000) (3.900000,29.168400) (3.950000,29.278200) (4.000000,29.243400) (4.050000,29.319600) (4.100000,29.318400) (4.150000,29.319000) (4.200000,29.350200) (4.250000,29.377800) (4.300000,29.402400) (4.350000,29.380800) (4.400000,29.385600) (4.450000,29.393400) (4.500000,29.410800) (4.550000,29.469000) (4.600000,
29.451600) (4.650000,29.487000) (4.700000,29.490600) (4.750000,29.547600) (4.800000,29.556000) (4.850000,29.553000) (4.900000,29.567400) (4.950000,29.586000) (5.000000,29.558400)};

\addplot[no marks] coordinates {(0.000000,27.258600) (0.050000,27.285000) (0.100000,27.309600) (0.150000,27.370800) (0.200000,27.468600) (0.250000,27.417600) (0.300000,27.533400) (0.350000,27.564000) (0.400000,27.643800) (0.450000,27.719400) (0.500000,27.699000) (0.550000,27.803400) (0.600000,27.756600) (0.650000,27.845400) (0.700000,27.796200) (0.750000,27.867600) (0.800000,27.967800) (0.850000,27.989400) (0.900000,28.036200) (0.950000,28.023000) (1.000000,28.137000) (1.050000,28.153800) (1.100000,28.159200) (1.150000,28.160400) (1.200000,28.254000) (1.250000,28.348800) (1.300000,28.344000) (1.350000,28.408200) (1.400000,28.384800) (1.450000,28.336800) (1.500000,28.423800) (1.550000,28.405200) (1.600000,28.572000) (1.650000,28.556400) (1.700000,28.540800) (1.750000,28.571400) (1.800000,28.649400) (1.850000,28.629000) (1.900000,28.648800) (1.950000,28.671600) (2.000000,28.682400) (2.050000,28.703400) (2.100000,28.755000) (2.150000,28.761000) (2.200000,28.789800) (2.250000,28.803600) 
(2.300000,28.798200) (2.350000,28.861800) (2.400000,28.911000) (2.450000,28.933800) (2.500000,28.946400) (2.550000,28.995000) (2.600000,28.963800) (2.650000,28.984200) (2.700000,29.019000) (2.750000,28.983000) (2.800000,29.048400) (2.850000,29.046000) (2.900000,29.091000) (2.950000,29.081400) (3.000000,29.128800) (3.050000,29.142000) (3.100000,29.175600) (3.150000,29.137200) (3.200000,29.160000) (3.250000,29.180400) (3.300000,29.222400) (3.350000,29.279400) (3.400000,29.225400) (3.450000,29.253000) (3.500000,29.287800) (3.550000,29.290200) (3.600000,29.309400) (3.650000,29.324400) (3.700000,29.359200) (3.750000,29.334600) (3.800000,29.349000) (3.850000,29.379000) (3.900000,29.381400) (3.950000,29.367000) (4.000000,29.375400) (4.050000,29.434200) (4.100000,29.407800) (4.150000,29.446800) (4.200000,29.400000) (4.250000,29.436000) (4.300000,29.485800) (4.350000,29.457600) (4.400000,29.544000) (4.450000,29.488800) (4.500000,29.521800) (4.550000,29.532000) (4.600000,
29.498400) (4.650000,29.520000) (4.700000,29.560200) (4.750000,29.545200) (4.800000,29.543400) (4.850000,29.589600) (4.900000,29.593800) (4.950000,29.587800) (5.000000,29.572800)};
\addlegendentry{Style 1}
\addlegendentry{Style 2}
\end{axis}
\end{tikzpicture}
\end{document}

enter image description here

Related Solutions

[Tex/LaTex] Adding values to pgfplot legend

You can use the gnuplot command set print "<filename" to open a new file, and then write the parameters into that file using print Ymax,EC50,nH. If you use set fit errorvariables;, the standard errors will be available as Ymax_err, EC50_err and so on. You can then use \pgfplotstableread{<filename>}<table macro> to read the file, and access the individual entries using \pgfplotstablegetelem{<row>}{<col>}\of<table macro>, which will save the entry into a temporary macro called \pgfplotsretval.

Here's an example of how to use this:

\documentclass[11pt]{article}
\usepackage{pgfplots}
\usepackage{pgfplotstable}
\usepackage{filecontents}

\begin{filecontents}{drc1.dat}
2   17
5   55
10  96
20  125
50  144
100 147
200 147
500 146
\end{filecontents}



\begin{document}

\begin{figure}[h!t]
\centering
\begin{tikzpicture}

\begin{axis}[
    legend pos=north west,
    xmode=log,
    ymode=linear,
    axis x line*=bottom,
    axis y line*=left,
    tick label style={font=\small},
    grid=both,
    tick align=outside, 
    tickpos=left,
    xlabel= {[ACh]} (nM),
    ylabel=Response (mm),
   %%% GRAPH RANGE %%%
        xmin=0.1, xmax=1000,
        ymin=0, ymax=160,
   %%%%%%%%%%%%%%
        width=0.7\textwidth,
        height=0.4\textwidth,
    ]

\addplot[only marks, mark size=1.8, black] file {drc1.dat};
    % Now call gnuplot to fit this data
    % The key is the raw gnuplot option
    % which allows to write a gnuplot script file
    \addlegendentry[anchor=mid,font=\tiny]{Experiment 1}

\addplot+[raw gnuplot, red, mark=none, smooth] gnuplot {
    set log x;
    f(x)=Ymax/(1+(EC50/x)^nH);
    % let gnuplot fit, using column 1 and 2 of the data file
    % using the following initial guesses
    Ymax=150;
    nH=1;
    EC50=50;
    set fit errorvariables;
     fit f(x) 'drc1.dat' using 1:2 via Ymax,EC50,nH;
         % Next, plot the function and specify plot range
         % The range should be approx. the same as the test.dat x range
     plot [x=0.1:1000] f(x);
    set print "parameters.dat"; % Open a file to save the parameters into
    print Ymax, Ymax_err; % Write the parameters to file
    print nH, nH_err;
    print EC50, EC50_err;
       };       
\addlegendentry[font=\tiny, text depth=2ex]{\pgfplotstableread{parameters.dat}\parameters % Open the file Gnuplot wrote
    \pgfplotstablegetelem{0}{0}\of\parameters \pgfmathsetmacro\paramA{\pgfplotsretval} % Get first element, save into \paramA
    \pgfplotstablegetelem{1}{0}\of\parameters \pgfmathsetmacro\paramB{\pgfplotsretval}
    \pgfplotstablegetelem{2}{0}\of\parameters \pgfmathsetmacro\paramC{\pgfplotsretval}
     $\frac{\pgfmathprintnumber{\paramA}}{\left(1+\frac{\pgfmathprintnumber{\paramB}}{[ACh]}\right)^{\pgfmathprintnumber{\paramC}}}$    
}

\end{axis}
\end{tikzpicture}

\end{figure}

\pgfplotstabletypeset[
    dec sep align,
    fixed,
    columns/0/.style={
        column name=Parameter
    },
    columns/1/.style={
        column name=Standard Error
    }
]{parameters.dat}

\end{document}

Which will yield

And here's my earlier, much cruder approach:

I've defined a macro \extractcoefficients, which takes the number of coefficients as an argument, and then first counts the number of lines in fit.log, then parses the relevant lines near the end of the file, saves the coefficient names, values and standard errors into a pgfplotstable called \coefficients, and additionally stores the values in a pgfmath array called \coefficient.

You can then either output the whole table using \pgfplotstabletypeset [coefficient table] \coefficients};, or place the values of the coefficients where you need them using \coefficient{<number>}.

\documentclass[11pt]{article}
\usepackage{pgfplots}
\usepackage{filecontents}
\usepackage{pgfplotstable}

\begin{filecontents}{drc1.dat}
2   17
5   55
10  96
20  125
50  144
100 147
200 147
500 146
\end{filecontents}

\makeatletter
\newcommand\create[1]{%
\expandafter\newcommand\csname #1\endcsname{My name is #1}}
%% "Master" macro: Parse file and store table and coefficients
%  Number of coefficients as argument
\newcommand{\extractcoefficients}[1]{
    \linesinfile{fit.log} % Count number of lines
    \addtocounter{linecount}{-9} % Coefficients start 9 lines from end
    \edef\lastresultline{\arabic{linecount}}
    \addtocounter{linecount}{-#1}
    \stepcounter{linecount}
    \edef\firstresultline{\arabic{linecount}}
    \pgfplotstableread[ % Set up coefficient table
        header=has colnames,
        row sep=crcr
        ]{
        Parameter Value SE\\
    }\coefficients
    \partialinput{\firstresultline}{\lastresultline}{fit.log}
    \def\coefficientarray{2}
    \pgfplotstableforeachcolumnelement{Value}\of{\coefficients}\as{\value}{
        \edef\coefficientarray{\coefficientarray,\value}
    }
    \edef\coefficientarray{{\coefficientarray}}
}

%% Count number of lines in a file
\newread\lf
\newcounter{linecount}
\newcommand\linesinfile[1]{%
    \setcounter{linecount}{0}
    \openin\lf #1
    \unless\ifeof\lf
        \loop\unless\ifeof\lf
            \readline\lf to\lfline
            \stepcounter{linecount}
        \repeat
        \closein\lf
    \fi
}

%% Go through a file, execute a command for each line within specified range
\makeatletter
\newcommand*\partialinput [3] {%
  \IfFileExists{#3}{%
    \openin\lf #3
    \setcounter{linecount}{1}
    \@whilenum\value{linecount}<#1 \do{%
      \read\lf to\lfline
      \stepcounter{linecount}%
    }
    \addtocounter{linecount}{-1}
    \@whilenum\value{linecount}<#2 \do{%
      \readline\lf to\lfline
      \parsecoeff{\lfline}%
      \stepcounter{linecount}%
    }%
    \closein\lf%
  }{%
    \errmessage{File `#3' doesn't exist!}%
  }%
}
\makeatother

%% Store the whitespace-separated values of a line in a table
\newcommand\parsecoeff[1]{%
    \pgfplotstableset{alias/.cd,
            Parameter/.initial=0,
            Value/.initial=2,
            SE/.initial=4}
    \edef\read{\noexpand\pgfplotstableread[
        row sep=crcr,
        header=false,
        ]{#1\noexpand\\}\noexpand\test}
    \read%
    \pgfplotstablevertcat{\coefficients}{\test}
}

%% Return the formatted coefficient
\newcommand{\coefficient}[1]{%
    \pgfmathparse{\coefficientarray[#1]}%
    \pgfmathprintnumber{\pgfmathresult}
}

%% PGFplotstable style for printing the coefficient table
\tikzset{
    /pgfplots/table/coefficient table/.style={
        columns={Parameter,Value, SE},
        columns/Parameter/.style=string type,
        columns/Value/.style={dec sep align},
        columns/SE/.style={dec sep align, fixed, fixed zerofill, precision=3}
    }
}


\begin{document}

\begin{figure}[h!t]
\centering
\begin{tikzpicture}

\begin{axis}[
    legend pos=north west,
    xmode=log,
    ymode=linear,
    axis x line*=bottom,
    axis y line*=left,
    tick label style={font=\small},
    grid=both,
    tick align=outside, 
    tickpos=left,
    xlabel= {[ACh]} (nM),
    ylabel=Response (mm),
   %%% GRAPH RANGE %%%
        xmin=0.1, xmax=1000,
        ymin=0, ymax=180,
   %%%%%%%%%%%%%%
        width=0.7\textwidth,
        height=0.45\textwidth,
    ]

\addplot[only marks, mark size=1.8, color=blue] file {drc1.dat};
    % Now call gnuplot to fit this data
    % The key is the raw gnuplot option
    % which allows to write a gnuplot script file
    \addlegendentry{{\tiny Experiment 1}}

\addplot+[raw gnuplot, draw=blue, mark=none, smooth] gnuplot {
    set log x;
    f(x)=Ymax/(1+(EC50/x)^nH);
    % let gnuplot fit, using column 1 and 2 of the data file
    % using the following initial guesses
    Ymax=150;
    nH=1;
    EC50=50;
     fit f(x) 'drc1.dat' using 1:2 via Ymax,EC50,nH;
         % Next, plot the function and specify plot range
         % The range should be approx. the same as the test.dat x range
     plot [x=0.1:1000] f(x);
       };       

\extractcoefficients{3}
\addlegendentry[text depth=2ex]{%
    \small{%
        $\frac{\coefficient{1}}{\left(1+\frac{\coefficient{2}}{[ACh]}\right)^{\coefficient{3}}}$
    }
}
\node at (rel axis cs:0.975,0.2) [
    anchor=east,
    font=\tiny,
    fill=white,
    fill opacity=0.75,
    text opacity=1
    ] {
    \pgfplotstabletypeset [coefficient table] \coefficients};
\end{axis}
\end{tikzpicture}

\end{figure}
\end{document}

[Tex/LaTex] Change mark size in legend entry

Use legend image post style={scale=3},.

\documentclass{standalone}
\usepackage{amsthm, amssymb}
\usepackage{pgfplots}
\pgfplotsset{compat=1.7}

\begin{document}
  \begin{tikzpicture}
    \begin{axis}[
      xmin = 0,
      xmax = 6,
      legend image post style={scale=3},
      legend style = {
        legend cell align=left,
        %mark options={scale=3},
        /tikz/every even column/.append style={column sep=1cm}
    }]

      \addplot[red,mark=*,only marks,mark size=1]  table {
      x y
      1 2
      2 4
      4 3
    };
    \addplot[blue,mark=triangle,only marks,mark size=1,mark options={rotate=180}]  table {
              x y
              1 1
              2 2
              4 1
            };

  \addlegendentry{no. 1}
  \addlegendentry{no.2}

    \end{axis}
  \end{tikzpicture}
\end{document}

Best Answer

Related Solutions

[Tex/LaTex] Adding values to pgfplot legend

[Tex/LaTex] Change mark size in legend entry

Related Question