I have to calculate the degree of s-polarization (perpendicular) of a
transmitted unpolarised light ray when it goes through a glass plate
($n=1.5$) at Brewster's angle (Brewster's window).
The setup would be something like this:
Using Fresnel's equation I have that the transmission coefficientes are $t_s=0.86$ and $t_p=1$. This can be arranged into a matrix:
$$t=\left( \begin{array}{cc} 0.86 & 0 \\ 0 & 1 \end{array} \right)$$
In this type of problems, the unpolarized incident beam can be described by:
$$E_i=E_0\left( \begin{array}{c} \cos \theta \\ \sin \theta e^{i\delta} \end{array} \right)=\frac{E_0}{\sqrt 2}\left( \begin{array}{c} 1 \\ 1 \end{array} \right) \implies E_{t}=\frac{E_0}{\sqrt 2}\left( \begin{array}{c} 0.86 \\ 1 \end{array} \right) $$
The transmited intensity is: $I=\left( \frac{0.86^2}{2}+\frac{1}{2} \right)I_0=0.87I_0$.
If $E_i$ described polarized light the degree of s-polarization would be:
$$P_s=\frac{I_s}{I}=\frac{0.86^2/2}{0.87}=0.43$$
But this assumes that the incident ray is fully polarized, which is wrong. I think that the difference $(1-0.86^2)I_0=0.26I_0$ could be the polarized component. And then, the degree of s-polarization intensity could be:
$$I_s=0.26\frac{0.86^2}{1+0.86^2}=0.11$$
But this is just a guess . The only case I've seen unpolarized light treated is for a linear polarizer, in that case the transmitted light is fully polarized.
In general, how would one calculete the polarized and unpolarized components?
Now I think it more reasonable the the polarized compontent has pure s-polarization.
Best Answer
The Fresnel transmission coefficients at the Brewster angle between two media of $n=1$ and $n=1.5$ are not 0.86 and 1.
I haven't checked the Maths, but looking at this: https://www.geogebratube.org/student/m325541 I would say the transmission coefficients are $t_s=0.6$ and $t_p=0.66$. The reflection coefficients $r_s=-0.4$ and $r_p=0$.
The transmission coefficients expressed in terms of power are about 0.86 and 1. Recall that the Transmittance, is $$ T_p = \frac{n_2}{n_1}\frac{\cos\theta_2}{\cos\theta_1} t_p^{2}$$
It's hard to follow what you are asking in the rest of the question. Using these transmission coefficients and the fact that unpolarised light can be treated as 50% p-polarized and 50% s-polarised, then the transmitted light will be p-polarised as $$ \frac{E_s}{E_{total}} = \frac{0.5 \times t_s}{0.5\times t_p + 0.5\times t_s} \simeq 47.6\%$$.
Or, in terms of power $$\frac{I_{s}}{I_{total}}= \frac{0.5 \times t_s^{2}}{0.5 \times t_s^{2} + 0.5 \times t_{p}^{2}} \simeq 45.2\%,$$ because the magnification factors are the same for both polarizations.
This of course only deals with the transmission through the first interface. You must then tackle the glass/air interface in a similar way if you wish to see what happens to light transmitted all the way through a block.
EDIT: As an aside; completely unpolarised light can be treated as equal amounts of light (i.e. equal E-field amplitudes) in two perpendicular directions in the plane perpendicular to the wave motion. The two components must not have any fixed phase relationship (otherwise you get elliptically polarised light). You can choose the two perpendicular directions to suit the problem. In this case, choosing the directions parallel (p-) and perpendicular (s-) to the plane of incidence is sensible!