For a lab that I have to do, the teacher has given me a data table of the displacement of a cart on a ramp after successive intervals of time. I have used this data to derive the velocities and accelerations of the cart.
This is all fine, the problem is that I am now being asked to find the angle of the ramp. I don't know how to figure this out because the acceleration is not constant. After every half a second the acceleration appears to switch between -1.68 m/s2 and -1.72 m/s2. There is no indication that any other forces are involved aside from gravity. How can this be possible if the acceleration of gravity is constant?
My initial thought was that it might be a circular or spiral ramp of some sort, but the displacement never decreases as I would expect after the cart would reach a displacement equal to the diameter of the circle. What else could it be and how could I find the angle from it?
Here is the data that I am given:
Time (s) | Displacement (m)
0.00 | -10.00
0.50 | -5.21
1.00 | -0.85
1.50 | 3.09
2.00 | 6.60
2.50 | 9.69
3.00 | 12.35
3.50 | 14.59
4.00 | 16.40
And here is the data that I have calculated:
Time (s) | Velocity (m/s)
0.50 | 9.6
1.00 | 8.73
1.50 | 7.88
2.00 | 7.02
2.50 | 6.18
3.00 | 5.32
3.50 | 4.48
4.00 | 3.62
Time (s) | Acceleration (m/s^2)
0.75 | -1.7
1.25 | -1.68
1.75 | -1.72
2.25 | -1.68
2.75 | -1.72
3.25 | -1.68
3.75 | -1.72
Best Answer
You are right in that gravity did not change during data collection. You are a victim of uncertainty, which is a very important part of experimental physics. I'm sorry in advance for the "wall of text", and I hope that this clears up some confusion.
The problem is that $1.50$ may not be exactly $1.500000000...$. Because the numbers are provided rounded, they are not exact and you have lost information. Imagine that my watch can only report time to the nearest second and my measuring tape only reports to the nearest meter. If I measure a car's movement and it moves 2.3 meters in 0.8 seconds (true measurements, 2.875 m/s) I am required to round all my data to the nearest round number (2 meters in 1 second, 2.0 m/s). So, if I calculate a number based on my rounded data, it won't perfectly reflect reality because my data do not perfectly reflect reality. Even though your numbers are more precise than my example (accurate down to hundredths of a second and centimeters), there is still some amount of uncertainty in the numbers.
Feel free to skip to the "What it all means" section. The stuff after this is pretty dry and obtuse.
Quantitative Explanation
Note that I'm going to call displacement $x$ and time $t$, just for convenience.
Let's have a look at a subset of the data as an example:
You know the displacement to two decimal places-- that means that, for $t = 1.50$, $x$ could be anywhere from $3.085$ to $3.094999... \approx 3.095$, and it would still be okay to call it $3.09$, as long as you're rounding to that number of significant digits. Similarly, the time might not be exactly $1.5$! So, if you calculate anything based on those numbers, there's a certain amount of uncertainty in the result. Since there are two variables ($t$ and $x$), they can both vary at once. With the equation $v = (x_f - x_i)/ \Delta t = $, $v$ is biggest when $\Delta x$ is maximized and $\Delta t$ is minimized (dividing by a smaller number yields a larger number), and $v$ is smallest when $\Delta x$ is smallest and $\Delta t$ is biggest. We don't know the true, unrounded values of the two variables, so any possible combination of them is just as good as any other. Here's the range of possible velocities based on the above displacements:
$t = 1.5 \rightarrow 2.0$:
$$ v_{max} = \frac{6.605 - 3.085}{1.995 - 1.505} \approx 7.18 \, \mathrm{m/s} $$
$$ v_{mid} = \frac{6.600 - 3.090}{2.000 - 1.500} = 7.02 \, \mathrm{m/s} $$
$$ v_{min} = \frac{6.595 - 3.095}{2.005 - 1.495} \approx 6.86 \, \mathrm{m/s} $$
Quite a range! Let's do it again for the next time so that we can get a range of accelerations:
$t = 2.0 \rightarrow 2.5$:
$$ v_{max} = \frac{9.695 - 6.595}{2.495 - 2.005} \approx 6.36\, \mathrm{m/s} $$
$$ v_{mid} = \frac{9.690 - 6.600}{2.500 - 2.000} = 6.18 \, \mathrm{m/s} $$
$$ v_{min} = \frac{9.685 - 6.605}{2.505 - 1.995} \approx 6.04 \, \mathrm{m/s} $$
Again, quite a range. Now, to find the max,min accelerations possible for your data, you take the same approach. For $a_{max}$, divide the biggest possible $\Delta v$ by the smallest possible $\Delta t$, and the reverse for the min. For the above numbers, you get accelerations like so:
$$ a_{min} = \frac{6.36 - 6.86}{2.505 - 1.995} \approx -0.98 \, \mathrm{m/s}^2 $$
$$ a_{mid} = \frac{6.18 - 7.02}{2.5 - 2} = -1.68 \, \mathrm{m/s}^2 $$
$$ a_{max} = \frac{6.04 - 7.18}{2.495 - 2.005} \approx -2.33 \, \mathrm{m/s}^2 $$
where "min" and "max" are used (somewhat sloppily) to mean "greatest in magnitude", not the true meanings of "minimum" and "maximum". If I haven't messed up the numbers, the intermediate accelerations could be anywhere in the above range!
What it all means: Now you should be able to recognize that, because your accelerations are derived from numbers of limited certainty and they fall within the range given above, they cannot really be said to be different-- they are said to be "within uncertainty" of each other. It would be appropriate to take the average of all your values and call that the best guess you have of the acceleration. If you wanted to be a true scientist about it, you might have a go at calculating the uncertainty in acceleration, which is nontrivial, or you could go the lazy route (like a lot of scientists :)) and use something like the standard error of all your acceleration values. Either way, the end-all is that the acceleration didn't change during the data collection, it only looks like it did because you didn't measure position and time precisely enough :)
If you're interested in reducing the uncertainty, read on!
These numbers are not acceptable, the range is too big. The problem is that our uncertainties ($0.005 \mathrm{m}$ and $0.005 \mathrm{s}$) are very large compared to our numbers: we're using time steps of half a second, but we have an uncertainty of $2 \cdot 0.005 = 0.01$ in each variable (twice the uncertainty because you're taking the difference of two values). You can reduce the effect by evaluating the difference across more than one time step (ie find the acceleration from $t=0 \rightarrow 1$ instead of $0 \rightarrow 0.5$. This way, the change in time (and displacement) is bigger, but the uncertainty remains the same, so it impacts the result less!