With R2017a, why the Viewer\Scope can't display multiple output curves in x*x layout, instead of displayed in one figure ? It has worked well with R2016b.
Best Answer
You need to connect/disconnect the signal to/from the display(s) of the Scope Viewer. Right click the blue Scope Viewer icon on the signal line (or the signal line itself) and go to Connect to Viewer (or Disconnect Viewer) > Scope > display#. If you have two plots in the Scope Viewer, make sure a signal is connected only to display 1 and the other signal is connected only to display 2.
Here is the default behavior of the layout button explained in the documentation. To quote it, "If the number of displays are less than the number of ports, signals from additional ports appear on the last display."
In the newer scopes there does not seem to be way (in my understanding) to assign signals to particular axes. The way you can get around this is to use a mux block and feed in signals appropriately to make sure you get the layout and signals assigned reliably. Example snapshot of implementation and display below:
Please select Diagram > Signals & Ports > Signal & Scope Manager. You will be able to see (and delete) all the scopes attached to the model, even the "invisible ones".
Best Answer