MATLAB: TI C2000 F28379D Support for uint8 Embedded Codertic2000uint8 Does the TI C2000 F28379D target support uint8? Best Answer According to the TI website, there is no current data type for a uint8 as seen in the following link.http://e2e.ti.com/support/microcontrollers/c2000/f/171/t/674880?TMS320F28379D-How-to-define-pointer-to-uint8-t-data-typeYou can however still have uint8's however this is a workaround from TI which is why Simulink does not currently have support for it.http://processors.wiki.ti.com/index.php/Byte_Accesses_with_the_C28x_CPU Related SolutionsMATLAB: C2000 F28379d SCIB Hi,I could view the waveform on a DSO. Make sure you hook to the correct pins on the launchpad.The Tx pin for SCI-B module is J1-4 and I could see the serial waveform on the same.Regards,Venkatesh C MATLAB: Problem with F28379D The problem was with the latest versions of CCS (10.30), after install the oldest version 10.2 no problem and the F28379D Launchpad is working. Related QuestionMATLAB to TI C2000 F28379D data exchange
Best Answer