MATLAB: Simulink Real-Time’s creating boot disk (CD and Removable Disk) in MatlabR2017b

cdcreate boot discMATLABmatlabr2017bremovable discslrtusbxpc target

Hi, I'm Japanese univercity student.

I have some problems at creating boot disk of Simulink Real-Time(in MATLAB R2017b).

I'm trying to creating boot disk of "CD" and "Removable Disk".

[When I create CD]:Select boot mode "CD", and click "create boot disk", a please wait diaglog flashes up, the progress bar fills but then no CD is burnt.(I can't select "burn disk")

[When I create Removable Disk]:Select boot mode "Removable Disk", a please wait diaglog flashe up, the progress bar fills and two files "BOOTSECT.RTT", "xpmttb.RTA" are in the USB. But, I can't boot Simulink Real-Time with these files.

What should I do? Thx.

Best Answer

I am not sure about your issue in CD boot image but Gowtham Uma M Jaganathan answer in following link may help you to confirm:

Creation of Simulink Real-Time CD Boot image failed. Matlab r2016b, Win 10.

https://jp.mathworks.com/matlabcentral/answers/308416-creation-of-simulink-real-time-cd-boot-image-failed-matlab-r2016b-win-10

Also about your issue in Removable Disk boot image, you need to prepare USB flash drive carefully as described in the documentation.

Cleaned and FAT32 formatted drive is required as primary.

Create a Bootable Partition

https://jp.mathworks.com/help/releases/R2016b/xpc/gs/creating-a-bootable-partition.html

Removable Disk Boot Method

https://jp.mathworks.com/help/releases/R2016b/xpc/gs/removable-disk-boot-method.html

HTH

Related Solutions

MATLAB: Creation of Simulink Real-Time CD Boot image failed. Matlab r2016b, Win 10.

This is a bug in R2016b when creating CD boot images due to the size of the kernel being larger than the size of a floppy 1.44mb using Graphics mode.

In order to workaround this issue you can create a boot disk without Graphics mode enabled, or use a different target boot method.

Besides disabling the graphics mode, you can also try using another boot method, for example using a USB drive: https://de.mathworks.com/help/xpc/gs/removable-disk-boot-method.html

MATLAB: Am I unable to setup a USB flash drive for standalone boot method with SLRT

DOS must be installed on the USB drive. Then the following SLRT files should be copied to the root of the drive:

autoexec.bat
xpcboot.com
slrtkrnl.rtb
ex_slrt_rt_osc.mldatx

The following documentation explains why DOS is necessary:

https://www.mathworks.com/help/releases/R2018a/xpc/gs/standalone-mode-embedded-option.html

I was able to successfully create a bootable DOS USB stick by following the instructions from this link:

https://www.thomas-krenn.com/en/wiki/Creating_a_Bootable_DOS_USB_Stick

Best Answer

Related Solutions

MATLAB: Creation of Simulink Real-Time CD Boot image failed. Matlab r2016b, Win 10.

MATLAB: Am I unable to setup a USB flash drive for standalone boot method with SLRT

Related Question