Hello everyone,
I have been coding for a while with matlab und now i started playing with Simulink (simscape). I am trying to build a circuit with different elements (C,L, RC-element,…), which actually works quit well. For excitation i want to use pulsed signals with different profiles, for example 10s positive, 100s break, 3s negative, 10s break,…. And here is my problem, the module am using (and also others) are just able to repeat the same pulse. But I cannot configure my own profile. I thought of using a Relay/switch and a second excitation module (or more), but that doesn’t not seem to be an elegant possibility (especially if I want to configure a very long profile). Do you have any ideas? Or is this the point where I actually need to build my own modules? I added a picture of my current circuit.
And I have another question. Is there a limitation of the data points for the scope module? Because as soon as I use more than 1000s the data at the beginning will be cut off with a sampling rate of 1Hz (for example if I do the simulation for 2000s, the first 500s will be cut of). If I increase the sampling Rate the data will be cut off quicker, depending on the rate (for example: 1500s; 2Hz, then the first 750s (or 1500 data points) will be cut off).
Thank you very much!
Best Answer