MATLAB: Matlab command for Simscape not running Simscape I Have entered the suggested command in the matlab command window. I have also installled Simscape. BHowever ,they are giving the error. Best Answer These examples require simscape electrical toolbox to be installed. Check whether you have simscape electrical installed by typingverand searching for a line containing simscape electrical Related SolutionsMATLAB: Running DOS command from Matlab You can redirect the output to a file if you do care about reviewing it later:system('mycommand > myoutputfile.txt')or you can just send the output to nullsystem('mycommand > NUL')or output and errors if you really don't care at all.system('mycommand 1 > NUL 2 > NUL') MATLAB: Is trim command not supported when Simscape blocks are present in the model Unfortunately, the "trim" command in not supported for Simscape blocks.I suggest you to use the Simscape Initial Condition Solver to find the steady state operating point for the system.You can get more details about finding an operating point of the system when Simscape blocks are involved in the following link:https://www.mathworks.com/help/releases/R2018a/physmod/simscape/ug/finding-an-operating-point.html Related Question
Best Answer