MATLAB: Is the National Instruments NI PCI-6703 D/A Board supported for Real-Time Windows Target

6703instrumentsnationalpcirtwt

I would like to know if the National Instruments NI PCI-6703 D/A Board is supported for Real-Time Windows Target.

This enhancement has been made for Release 14 (R14). For previous product releases, read below for any possible workarounds:

1. Download the file rtwin_pci670x.zip and place it into a temporary directory.

2. Run MATLAB and change your working directory to that temporary directory.

3. Unpack the update into its destination directory by the command

unzip('rtwin_pci670x.zip', matlabroot).

The boards should now be selectable from the Install New Board menu.

As of Real-Time Windows Target 2.2 (R13), the National Instruments PCI-6014 board is supported. The driver for this board is available below::

1. Download the file rtwin_pci601x.zip and place it into a temporary directory.

2. Run MATLAB and change your working directory to that temporary directory.

3. Unpack the update into its destination directory by the command

unzip('rtwin_pci601x.zip', matlabroot)

The boards should now be selectable from the Install New Board menu.

1. Download the file rtwin_pci6036.zip and place it into a temporary directory.

2. Run MATLAB and change your working directory to that temporary directory.

3. Unpack the update into its destination directory by the command

unzip('rtwin_pci6036.zip', matlabroot)

The boards should now be selectable from the Install New Board menu.