MATLAB: Inserting vertical and horizontal line in bodeplot

bodelinesplot

Hello
With below code I have made a bode plot. Then I have calculatted an angular frequency.
I want to insert a vertical line from my found angular frequency(found to be 0.041889), and also a horizontal line so I can determine the phase angel on the y-axis:
Can this be done?
IThe plan is that it should look like this:
My code:
sys1=tf([1805.1],[4637.61 136.2 1]) %transfer function
w=logspace(-5,2); %Define frequency range
[A,phi]=bode(sys1,w); %Amplitude ratio (A) and phase shift (phi)
figure
subplot(2,1,1)
loglog(w,A(:)) %Amplitude ratio vs frequency
grid on
ylabel('AR')
subplot(2,1,2)
semilogx(w,phi(:))
ylabel('Phase angle(Degrees)')
xlabel('Frequency(rad/s)')
legend({'Lower tank'},'Fontsize',14)  %add "title" to plot...

Best Answer

xline and yline should work for this purpose. Both functions were introduced with R2018b. If you use an earlier release, just define two points for every line you need and use the plot command combined with hold on and hold off including the line format as you wish it to look like.
Related Question