MATLAB: Implementation of functions not supported by Mathworks

c2000Embedded Codersdfmsimulink

You are trying to implement a feature not supported by Mathworks on the TI C2000 TMS320F28379D processor.
The build itself has finished normally, but parameters cannot be set for some registers.
What settings should I add later to set parameters in the TI C2000 TMS320F28379D processor registry?
The configuration file custom code has the following settings and the necessary files are inserted.
Config1.png
Config2.png
In the Simulink model, the header is set to Modek Header and the header file declaration is included.
Model Header.png
Registry setting is done using Model Copy block instead of S-function block.
The example of insertion is implemented as follows.
RegistoryInsert1.png
The generated C code is as follows.
RegistoryInsert1_C Code.png
The files generated in the ERT folder are as follows.
ertfolder_filelist.png

Best Answer

Hi,
Please refer the below post for the SDFM settings needed to enable the same.
e2e.ti.com
From the post, User got it working after enabling the module clock.
You can use custom code blocks from simulink coder to add initialization code.
HTH,
Regards,
Venkatesh C
Related Question