MATLAB: I would like to know information about the graph.

5G5g nr5g nr-tm5g nr-tm and frc waveform generation5g toolbox5g waveform5g wireless communication 5g nrNR

I would like to know what the graph is like in the figure below and how are they different? When I set Generate as follows

For NR-FR1-TM1.1

For NR-FR2-TM1.1

Finally, I want to know that the two graphs are different or how are they the same?

Thank you.

Best Answer

The first of those is defined at the very bottom of PDF page 45 of

https://www.etsi.org/deliver/etsi_ts/138100_138199/13814101/15.00.00_60/ts_13814101v150000p.pdf

The second of those is defined at the top of PDF page 55 of

https://www.etsi.org/deliver/etsi_ts/138100_138199/13814102/15.02.00_60/ts_13814102v150200p.pdf

The specification numbers are found on https://www.mathworks.com/help/5g/ug/5g-nr-tm-waveform-generation.html

Related Solutions

MATLAB: Support for Midamble in IEEE 802.11ac WLAN Toolbox objects

The WLAN Toolbox only supports standard compliant waveforms. The IEEE 802.11ac standard does not support Midamble. For this reason, the WLAN Toolbox does not support this feature for IEEE 802.11ac.

Midamble is supported by the WLAN Toolbox for the IEEE 802.11ax standard.

MATLAB: Is windowing used when generating the waveform with the 5G NR-TM and FRC Waveform Generation example

By default, windowing is turned on for waveforms which are generated with the 5G NR-TM and FRC Waveform Generation example. If you would like windowing to be turned off, the following steps can be used to turn it off:

refwavegen = hNRReferenceWaveformGenerator('NR-FR1-TM3.1');
refwavegen = makeConfigWritable(refwavegen);
refwavegen.Config.Windowing = 0;
[refwaveform,refwaveinfo,info] = generateWaveform(refwavegen);

Best Answer

Related Solutions

MATLAB: Support for Midamble in IEEE 802.11ac WLAN Toolbox objects

MATLAB: Is windowing used when generating the waveform with the 5G NR-TM and FRC Waveform Generation example

Related Question