MATLAB: How to implement digital iir lowpass filter in C programming by using coefficients of this filter

dspiir filter

 these are coefficients;

[b,a]=sos2tf(SOS)

b =

     1     5    10    10     5     1

a =

    1.0000   -4.9980    9.9919   -9.9878    4.9919   -0.9980

Best Answer

You find a complete filter implementation in C inside FEX: FilterM

A Matlab version can be found here: http://www.mathworks.com/matlabcentral/answers/9900#answer_13623 and the converion to C should be easy.

Related Solutions

MATLAB: Fir and iir filtering

You have to know your filter specifications. If you do, you can do both with fdesign.lowpass and fdesign.highpass

fdesign.lowpass and fdesign.highpass have different specification strings which support different filter designs.

The default string 'Fp,Fst,Ap,Ast' supports both FIR and IIR designs.

Here is an example:

Design a lowpass filter with a passband frequency of 1 kHz, a stopband frequency of 1.5 kHz, passband ripple of 0.5 dB, and stopband attenuation of 40 dB. The sampling frequency is 20 kHz

   d = fdesign.lowpass('Fp,Fst,Ap,Ast',1e3,1.5e3,0.5,40,20e3);
   designmethods(d)  %shows which designs are valid for this spec
   Hdeq = design(d,'equiripple'); % FIR filter
   Hbutt = design(d,'butter'); %IIR design

MATLAB: How to design FIR lowpass filter with cutoff frequency, fc1 = 20 Hz and FIR bandpass filter with cutoff frequency fc2 = 10 Hz and fc3 = 35 Hz.

Déjà vu

how to design IIR highpass filter with cutoff frequency of 20Hz and FIR bandpass filter with cutoff frequency of 10Hz and 15Hz?

Make the appropriate changes to get the cascaded filter you want.

Best Answer

Related Solutions

MATLAB: Fir and iir filtering

MATLAB: How to design FIR lowpass filter with cutoff frequency, fc1 = 20 Hz and FIR bandpass filter with cutoff frequency fc2 = 10 Hz and fc3 = 35 Hz.

Related Question