MATLAB: How to create a hole in a solid using Simscape Multibody holeSimscapeSimscape Multibodysolid How do I design a Simscape Multibody model that has a plate with a hole a few inches away from the center? Best Answer For making the plate with a hole , here are two methods that you can try:1. You can create a STEP file in CAD and then import that in multibody: https://www.mathworks.com/help/physmod/sm/ug/specifying-solid-geometry.html#mw_762a6758-a52e-4a8d-9554-e60230c41f732. You can define a cross section and then extrude it (in MATLAB) to make the parthttps://www.mathworks.com/help/physmod/sm/ug/modeling-extrusions-and-revolutions.htmlThe second example also has a Cross-Sections with Holes example that will be useful for your case and help you creating the custom solid block. Following link provides more information:https://www.mathworks.com/help/physmod/sm/ug/modeling-extrusions-and-revolutions.html#mw_6c6ad963-ff8a-4f66-91dd-f5b1746eded6 Related SolutionsMATLAB: How can i add a table( A solid block with some legs) for the ramp shown here H Ishanyou could reuse the table in this example - or at least take an inspiration:https://www.mathworks.com/help/physmod/sm/ug/sensing-composite-forces-and-torques-in-joints-potter-s-wheel.htmlyou can skip the weld joind at the bottom of the legs if you like. They are there just to offer a measure point of the constraint forces. MATLAB: Contact for it to stand motion of chair and human body See the contact force block to model the contact between two objects in simscape: https://www.mathworks.com/help/physmod/sm/ug/modeling-contact-force-between-two-solids.htmlAlso, look at this FEX package, it also have several examples, you can have a look at them to understand the working: https://www.mathworks.com/matlabcentral/fileexchange/47417-simscape-multibody-contact-forces-library Related QuestionComposite Force returns three signals
Best Answer