Hi all,
The communication between my host and target PC is lost everytime I boot the target PC into the xPC environment. I've tried 3 ways of booting – FDD, network, and CD boot – and all gave the same result. However, in the windows environment, the communication works well.
I purchased an EXPI9301CTBLK Intel Gigabit CT Desktop Adapter ) and plugged it into the PCIe slot. This card has Intel 82574L gigabit ethernet controller. I also checked 'Device Instance ID' for the device which are; vendor = 0x8086 and device ID = 0x10D3. Hence, I'm sure it's compatible. This card is properly installed and it works well in the windows environment (I used it for internet too).
I've also tried to adjust the BIOS setting for the target PC under Peripherals'>Onboard device>Onboard LAn boot Rom and disable it. I thought to disable the onboard ethernet. It still doesn't work.
I've seen this solution to a problem which is very similar to mine: http://www.mathworks.com/support/solutions/en/data/1-6JKGBJ/index.html but… it still doesn't work. =(
Any ideas anyone?
Here are some details of my comps.
Host:
Dell laptop – Intel core i7 CPU, Intel 82577LM gigabit network adapter, Windows 7.
Target PC:
Desktop Shuttle XPC – SG33G50 motherboard with built in Generic MArvell Yukon 88
Here are some info perhaps useful to you:
getxpcpci('all')??? Error using ==> AutoConnect at 7Message: A connection attempt failed because the connectedparty did not properly respond after a period of time, orestablished connection failed because connected host has failedto respond 192.168.0.220:22223Source: SystemHelpLink:Error in ==> getxpcpci>getInstalledPCI at 294xpctarget.AutoConnect(clrObj);Error in ==> getxpcpci at 123pcii=getInstalledPCI(tg);________________________________>> getxpcenv xPC Target default environment Version : 5.0 CCompiler : VisualC CompilerPath : C:\Program Files\Microsoft Visual Studio 10.0 Name : TargetPC1 TargetRAMSizeMB : Auto MaxModelSize : 1MB SecondaryIDE : off NonPentiumSupport : off MulticoreSupport : off HostTargetComm : TcpIp RS232HostPort : COM1 RS232Baudrate : 115200 TcpIpTargetAddress : 192.168.0.220 TcpIpTargetPort : 22222 TcpIpSubNetMask : 255.255.255.0 TcpIpGateway : 255.255.255.255 TcpIpTargetDriver : I8254x TcpIpTargetBusType : PCI TcpIpTargetISAMemPort : 0x300 TcpIpTargetISAIRQ : 5 TargetScope : Enabled xPC Target Embedded Option EmbeddedOption : Enabled TargetBoot : NetworkBoot TargetMACAddress : 00:1b:21:ad:8e:70 BootFloppyLocation : CDBootImageLocation : C:\Users\ang.cs\Desktop DOSLoaderLocation :
Best Answer