MATLAB: Help with looping problem

for loop

Here I am defining x and y coordinates of rays vertically approaching a boundary (currently sin(x))

x = 0:0.1:pi
rx1 = [x(1) x(1)]            % x-coordinates, incoming ray 1
ry1 = [y0 sin(x(1))]         % y-coordinates, incoming ray 1
rx2 = [x(2) x(2)]            % x-coordinates, incoming ray 2
ry2 = [y0 sin(x(2))]         % y-coordinates, incoming ray 2
rx3 = [x(3) x(3)]            % x-coordinates, incoming ray 3
ry3 = [y0 sin(x(3))]         % y-coordinates, incoming ray 3

and so on for the length of vector (x) = 32

Clearly this isn't a good way to write the program. The alternative approach I have tried to use is the following:

i = 1
for i = 1:length(x)
rx(i) = [x(i) x(i)]
ry(i) = [y0 sin(x(i))]
end

Which returns the error:

In an assignment A(I) = B, the number of elements in B and I must be the same.

So clearly this isn't the way to achieve what I was trying to do. I would greatly appreciate if someone could help me resolve this, as I have been stuck on it for some time.

Best Answer

Why would you want to create 64 variables like that? What a mess it would be to deal with in further steps. Perhaps two cell arrays could get the job done:

for ii = 1:length(x)
  rx{ii} = [x(ii) x(ii)];  % rx is a cell array.
  ry{ii} = [y0 sin(x(ii))];
end

Now the really important question is why do you need to do this at all? What is your next step that requires you to have these arrays as individuals, rather than just using x and sin(x)?

Related Solutions

MATLAB: Error using surf X, Y, Z, and C cannot be complex error

this is John BG <mailto:jgb2012@sky.com jgb2012@sky.com>

The problem is not in solving

x = 0:0.8:pi;
A = sin(x).^(1/3)
B = cos(x).^(1/3)

the operator

.^

solves for either real or complex.

The problem lays in the fact that surf doesn't take in complex values.

To solve the long expression of H, since you are dealing with complex numbers, you have to plot 2 surfs, not one: Real and Imaginary, or Modulus and Phase

clc
theta5=[0:0.1:pi];
theta4=[0:0.1:pi];
[X,Y]=meshgrid(theta4,theta5);
H=(((((cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).*(cos(X).^2.*cos(Y).^2-cos(X).^2*sin(X).^2+cos(Y).^2.*sin(X).^2+cos(X).^2.*cos(Y).^4.*sin(X).^2+2*cos(X).^2.*sin(X).^2.*sin(Y).^2-cos(Y).^2.*sin(X).^2.*sin(Y).^2-cos(X).^2.*sin(X).^2.*sin(Y).^4))./6+(cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).^3./27+(cos(X).^2.*cos(Y).^2.*sin(X).^2)./2-(cos(X).^2.*cos(Y).^6.*sin(X).^2)./2-(cos(X).^2.*cos(Y).^2.*sin(X).^2.*sin(Y).^2)./2-cos(X).^2.*cos(Y).^4.*sin(X).^2.*sin(Y).^2).^2-((cos(X).^2.*cos(Y).^2)./3-(cos(X).^2.*sin(X).^2)./3+(cos(Y).^2.*sin(X).^2)./3+(cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(X).^2+sin(X).^2.*sin(Y).^2).^2./9+(cos(X).^2*cos(Y).^4.*sin(X).^2)./3+(2.*cos(X).^2.*sin(X).^2.*sin(Y).^2)./3-(cos(Y).^2.*sin(X).^2.*sin(Y).^2)./3-(cos(X).^2.*sin(X).^2.*sin(Y).^4)./3).^3).^(1/2)-((cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).*(cos(X).^2.*cos(Y).^2-cos(X).^2.*sin(X).^2+cos(Y).^2.*sin(X).^2+cos(X).^2.*cos(Y).^4.*sin(X).^2+2.*cos(X).^2.*sin(X).^2.*sin(Y).^2-cos(Y).^2.*sin(X).^2.*sin(Y).^2-cos(X).^2.*sin(X).^2.*sin(Y).^4))./6-(cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).^3./27-(cos(X).^2.*cos(Y).^2.*sin(X).^2)./2+(cos(X).^2.*cos(Y).^6.*sin(X).^2)./2+(cos(X).^2.*cos(Y).^2.*sin(X).^2.*sin(Y).^2)./2+cos(X).^2.*cos(Y).^4.*sin(X).^2.*sin(Y).^2).^(1/3)+cos(X).^2./3-cos(Y).^2./3+sin(X).^2./3+((cos(X).^2.*cos(Y).^2)./3-(cos(X).^2.*sin(X).^2)./3+(cos(Y).^2.*sin(X).^2)./3+(cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).^2./9+(cos(X).^2.*cos(Y).^4.*sin(X).^2)./3+(2*cos(X).^2.*sin(X).^2.*sin(Y).^2)./3-(cos(Y).^2.*sin(X).^2.*sin(Y).^2)./3-(cos(X).^2.*sin(X).^2.*sin(Y).^4)./3)./(((((cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).*(cos(X).^2.*cos(Y).^2-cos(X).^2.*sin(X).^2+cos(Y).^2.*sin(X).^2+cos(X).^2.*cos(Y).^4.*sin(X).^2+2.*cos(X).^2.*sin(X).^2.*sin(Y).^2-cos(Y).^2.*sin(X).^2.*sin(X).^2-cos(X).^2.*sin(X).^2.*sin(Y).^4))./6+(cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).^3./27+(cos(X).^2.*cos(Y).^2.*sin(X).^2)./2-(cos(X).^2.*cos(Y).^6.*sin(X).^2)./2-(cos(X).^2.*cos(Y).^2.*sin(X).^2.*sin(Y).^2)./2-cos(X).^2.*cos(Y).^4.*sin(X).^2.*sin(Y).^2).^2-((cos(X).^2.*cos(Y).^2)./3-(cos(X).^2.*sin(X).^2)./3+(cos(Y).^2.*sin(X).^2)./3+(cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).^2./9+(cos(X).^2.*cos(Y).^4.*sin(X).^2)./3+(2.*cos(X).^2.*sin(X).^2.*sin(Y).^2)./3-(cos(Y).^2.*sin(X).^2.*sin(Y).^2)./3-(cos(X).^2.*sin(X).^2.*sin(Y).^4)./3).^3).^(1/2)-((cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).*(cos(X).^2.*cos(Y).^2-cos(X).^2.*sin(X).^2+cos(Y).^2.*sin(X)^2+cos(X).^2.*cos(Y).^4.*sin(X).^2+2.*cos(X).^2.*sin(X).^2.*sin(Y).^2-cos(Y).^2.*sin(X).^2.*sin(Y).^2-cos(X).^2.*sin(X).^2.*sin(Y).^4))./6-(cos(Y).^2-cos(X).^2-sin(X).^2+cos(X).^2.*sin(Y).^2+sin(X).^2.*sin(Y).^2).^3./27-(cos(X).^2.*cos(Y).^2.*sin(X).^2)./2+(cos(X).^2.*cos(Y).^6.*sin(X).^2)./2+(cos(X).^2.*cos(Y).^2.*sin(X).^2.*sin(Y).^2)./2+cos(X).^2.*cos(Y).^4.*sin(X).^2.*sin(Y).^2).^(1/3)-(cos(X).^2.*sin(Y).^2)./3-(sin(X).^2.*sin(Y).^2)./3;
figure(1);surf(X,Y,abs(H))
figure(2);surf(X,Y,angle(H))

if you find this answer useful would you please be so kind to consider marking my answer as Accepted Answer?

To any other reader, if you find this answer useful please consider clicking on the thumbs-up vote link

thanks in advance for time and attention

John BG

<mailto:jgb2012@sky.com jgb2012@sky.com>

MATLAB: Undefined f tand for input arg sym

For symbolic inputs, there is no tand(), atand(), atand2(), cosd(), acosd(), sind(), or asind() .

You need to convert the argument to radians yourself, or define sind and so on yourself. For example,

Pi = sym('pi');
sinD = @(x) sin(x*Pi/180);
cosD = @(x) cos(x*Pi/180);
tanD = @(x) tan(x*Pi/180);
atanD = @(x) atan(x) * 180/Pi;
atanD2 = @(y,x) atan2(y, x) * 180/Pi;
ea = m + (180/pi20)* ec * sinD(m)* (1 + ec * cosD(m));    %corrected from original, which had cos(m)
          keeplooping = true;
           while ea > 0.005
              E1 = (ea - (180/pi20)* ec * sinD(ea)-m)/(1 - ec * cosD(ea));
              E1 = ea;
              keeplooping;
                  if ea <= 0.005
                      keeplooping = false
                      return
                  end
           end
v = 2 * atanD((sqrt(1+ec))* tanD(ea/2));
r = (a *(1-(ec^2))/(1+ec* cosD(v)));
x = cosD(ea) - ec;
y = sinD(ea) * sqrt(1 - ec* ec);
r = sqrt(x*x + y*y);
v = atanD2(y,x);

Best Answer

Related Solutions

MATLAB: Error using surf X, Y, Z, and C cannot be complex error

MATLAB: Undefined f tand for input arg sym

Related Question