I'm trying to complete a Code Composer Studio Environment Setup but I have a problem when I'm running the program. I've installed all the necessary software to run it, but I get this error when I'm running the program:
Undefined function or variable 'xmakefilesetup'.Error in LNCCSSetupGuiError in gui_mainfcn (line 95) feval(varargin{:});Error in LNCCSSetupGuiError inmatlab.graphics.internal.figfile.FigFile/read>@(hObject,eventdata)LNCCSSetupGui('btnApply_Callback',hObject,eventdata,guidata(hObject)) Error while evaluating DestroyedObject Callback.I've also added the program where the error occurs:
function varargout = gui_mainfcn(gui_State, varargin)
% GUI_MAINFCN Support function for creation and callback dispatch of GUIDE GUIs.
% GUI_MAINFCN is called from inside MATLAB code files generated by GUIDE to handle
% GUI creation, layout, and callback dispatch.
%
% See also: GUIDE.
% GUI_MAINFCN provides these command line APIs for dealing with GUIs
%
% UNTITLED, by itself, creates a new UNTITLED or raises the existing
% singleton*.
%
% H = UNTITLED returns the handle to a new UNTITLED or the handle to
% the existing singleton*.
%
% UNTITLED('CALLBACK',hObject,eventData,handles,...) calls the local
% function named CALLBACK in UNTITLED.M with the given input arguments.
%
% UNTITLED('Property','Value',...) creates a new UNTITLED or raises the
% existing singleton*. Starting from the left, property value pairs
% are
% applied to the GUI before untitled_OpeningFunction gets called. An
% unrecognized property name or invalid value makes property application
% stop. All inputs are passed to untitled_OpeningFcn via varargin.
%
% *See GUI Options on GUIDE's Tools menu. Choose "GUI allows only one
% instance to run (singleton)".
% Copyright 1984-2015 The MathWorks, Inc.
gui_StateFields = {'gui_Name'
'gui_Singleton'
'gui_OpeningFcn'
'gui_OutputFcn'
'gui_LayoutFcn'
'gui_Callback'};
gui_Mfile = '';
for i=1:length(gui_StateFields)
if ~isfield(gui_State, gui_StateFields{i})
error(message('MATLAB:guide:StateFieldNotFound', gui_StateFields{ i }, gui_Mfile));
elseif isequal(gui_StateFields{i}, 'gui_Name')
gui_Mfile = [gui_State.(gui_StateFields{i}), '.m'];
end
end
numargin = length(varargin);
if numargin == 0
% UNTITLED
% create the GUI only if we are not in the process of loading it
% already
gui_Create = true;
elseif local_isInvokeActiveXCallback(gui_State, varargin{:})
% UNTITLED(ACTIVEX,...)
vin{1} = gui_State.gui_Name;
vin{2} = [get(varargin{1}.Peer, 'Tag'), '_', varargin{end}];
vin{3} = varargin{1};
vin{4} = varargin{end-1};
vin{5} = guidata(varargin{1}.Peer);
feval(vin{:});
return;
elseif local_isInvokeHGCallback(gui_State, varargin{:})
% UNTITLED('CALLBACK',hObject,eventData,handles,...)
gui_Create = false;
else
% UNTITLED(...)
% create the GUI and hand varargin to the openingfcn
gui_Create = true;
end
if ~gui_Create
% In design time, we need to mark all components possibly created in
% the coming callback evaluation as non-serializable. This way, they
% will not be brought into GUIDE and not be saved in the figure file
% when running/saving the GUI from GUIDE.
designEval = false;
if (numargin>1 && ishghandle(varargin{2}))
fig = varargin{2};
while ~isempty(fig) && ~ishghandle(fig,'figure')
fig = get(fig,'parent');
end
designEval = isappdata(0,'CreatingGUIDEFigure') || (isscalar(fig)&&isprop(fig,'GUIDEFigure'));
end
if designEval
beforeChildren = findall(fig);
end
% evaluate the callback now
varargin{1} = gui_State.gui_Callback;
if nargout
[varargout{1:nargout}] = feval(varargin{:});
else
feval(varargin{:});
end
% Set serializable of objects created in the above callback to off in
% design time. Need to check whether figure handle is still valid in
% case the figure is deleted during the callback dispatching.
if designEval && ishghandle(fig)
set(setdiff(findall(fig),beforeChildren), 'Serializable','off');
end
else
if gui_State.gui_Singleton
gui_SingletonOpt = 'reuse';
else
gui_SingletonOpt = 'new';
end
% Check user passing 'visible' P/V pair first so that its value can be
% used by oepnfig to prevent flickering
gui_Visible = 'auto';
gui_VisibleInput = '';
for index=1:2:length(varargin)
if length(varargin) == index || ~ischar(varargin{index})
break;
end
% Recognize 'visible' P/V pair
len1 = min(length('visible'),length(varargin{index}));
len2 = min(length('off'),length(varargin{index+1}));
if ischar(varargin{index+1}) && strncmpi(varargin{index},'visible',len1) && len2 > 1
if strncmpi(varargin{index+1},'off',len2)
gui_Visible = 'invisible';
gui_VisibleInput = 'off';
elseif strncmpi(varargin{index+1},'on',len2)
gui_Visible = 'visible';
gui_VisibleInput = 'on';
end
end
end
% Open fig file with stored settings. Note: This executes all component
% specific CreateFunctions with an empty HANDLES structure.
% Do feval on layout code in m-file if it exists
gui_Exported = ~isempty(gui_State.gui_LayoutFcn);
% this application data is used to indicate the running mode of a GUIDE
% GUI to distinguish it from the design mode of the GUI in GUIDE. it is
% only used by actxproxy at this time.
setappdata(0,genvarname(['OpenGuiWhenRunning_', gui_State.gui_Name]),1);
if gui_Exported
gui_hFigure = feval(gui_State.gui_LayoutFcn, gui_SingletonOpt);
% make figure invisible here so that the visibility of figure is
% consistent in OpeningFcn in the exported GUI case
if isempty(gui_VisibleInput)
gui_VisibleInput = get(gui_hFigure,'Visible');
end
set(gui_hFigure,'Visible','off')
% openfig (called by local_openfig below) does this for guis without
% the LayoutFcn. Be sure to do it here so guis show up on screen.
movegui(gui_hFigure,'onscreen');
else
gui_hFigure = local_openfig(gui_State.gui_Name, gui_SingletonOpt, gui_Visible);
% If the figure has InGUIInitialization it was not completely created
% on the last pass. Delete this handle and try again.
if isappdata(gui_hFigure, 'InGUIInitialization')
delete(gui_hFigure);
gui_hFigure = local_openfig(gui_State.gui_Name, gui_SingletonOpt, gui_Visible);
end
end
if isappdata(0, genvarname(['OpenGuiWhenRunning_', gui_State.gui_Name]))
rmappdata(0,genvarname(['OpenGuiWhenRunning_', gui_State.gui_Name]));
end
% Set flag to indicate starting GUI initialization
setappdata(gui_hFigure,'InGUIInitialization',1);
% Fetch GUIDE Application options
gui_Options = getappdata(gui_hFigure,'GUIDEOptions');
% Singleton setting in the GUI MATLAB code file takes priority if different
gui_Options.singleton = gui_State.gui_Singleton;
if ~isappdata(gui_hFigure,'GUIOnScreen')
% Adjust background color
if gui_Options.syscolorfig
set(gui_hFigure,'Color', get(0,'DefaultUicontrolBackgroundColor'));
end
% Generate HANDLES structure and store with GUIDATA. If there is
% user set GUI data already, keep that also.
data = guidata(gui_hFigure);
handles = guihandles(gui_hFigure);
if ~isempty(handles)
if isempty(data)
data = handles;
else
names = fieldnames(handles);
for k=1:length(names)
data.(char(names(k)))=handles.(char(names(k)));
end
end
end
guidata(gui_hFigure, data);
end
% Apply input P/V pairs other than 'visible'
for index=1:2:length(varargin)
if length(varargin) == index || ~ischar(varargin{index})
break;
end
len1 = min(length('visible'),length(varargin{index}));
if ~strncmpi(varargin{index},'visible',len1)
try set(gui_hFigure, varargin{index}, varargin{index+1}), catch break, end
end
end
% If handle visibility is set to 'callback', turn it on until finished
% with OpeningFcn
gui_HandleVisibility = get(gui_hFigure,'HandleVisibility');
if strcmp(gui_HandleVisibility, 'callback')
set(gui_hFigure,'HandleVisibility', 'on');
end
feval(gui_State.gui_OpeningFcn, gui_hFigure, [], guidata(gui_hFigure), varargin{:});
if isscalar(gui_hFigure) && ishghandle(gui_hFigure)
% Handle the default callbacks of predefined toolbar tools in this
% GUI, if any
guidemfile('restoreToolbarToolPredefinedCallback',gui_hFigure);
% Update handle visibility
set(gui_hFigure,'HandleVisibility', gui_HandleVisibility);
% Call openfig again to pick up the saved visibility or apply the
% one passed in from the P/V pairs
if ~gui_Exported
gui_hFigure = local_openfig(gui_State.gui_Name, 'reuse',gui_Visible);
elseif ~isempty(gui_VisibleInput)
set(gui_hFigure,'Visible',gui_VisibleInput);
end
if strcmpi(get(gui_hFigure, 'Visible'), 'on')
figure(gui_hFigure);
if gui_Options.singleton
setappdata(gui_hFigure,'GUIOnScreen', 1);
end
end
% Done with GUI initialization
if isappdata(gui_hFigure,'InGUIInitialization')
rmappdata(gui_hFigure,'InGUIInitialization');
end
% If handle visibility is set to 'callback', turn it on until
% finished with OutputFcn
gui_HandleVisibility = get(gui_hFigure,'HandleVisibility');
if strcmp(gui_HandleVisibility, 'callback')
set(gui_hFigure,'HandleVisibility', 'on');
end
gui_Handles = guidata(gui_hFigure);
else
gui_Handles = [];
end
if nargout
[varargout{1:nargout}] = feval(gui_State.gui_OutputFcn, gui_hFigure, [], gui_Handles);
else
feval(gui_State.gui_OutputFcn, gui_hFigure, [], gui_Handles);
end
if isscalar(gui_hFigure) && ishghandle(gui_hFigure)
set(gui_hFigure,'HandleVisibility', gui_HandleVisibility);
end
end
function gui_hFigure = local_openfig(name, singleton, visible)
% openfig with three arguments was new from R13. Try to call that first, if
% failed, try the old openfig.
if nargin('openfig') == 2
% OPENFIG did not accept 3rd input argument until R13,
% toggle default figure visible to prevent the figure
% from showing up too soon.
gui_OldDefaultVisible = get(0,'defaultFigureVisible');
set(0,'defaultFigureVisible','off');
gui_hFigure = matlab.hg.internal.openfigLegacy(name, singleton);
set(0,'defaultFigureVisible',gui_OldDefaultVisible);
else
% Call version of openfig that accepts 'auto' option"
gui_hFigure = matlab.hg.internal.openfigLegacy(name, singleton, visible);
% %workaround for CreateFcn not called to create ActiveX
% peers=findobj(findall(allchild(gui_hFigure)),'type','uicontrol','style','text');
% for i=1:length(peers)
% if isappdata(peers(i),'Control
Related Question
- Error When I try to use buttons on the GUI
- Togglebutton Problem
- This error happens when i press the run button . I used the matlab gui pushbutton to control arduino led.pls help me.
- Using a slider to move a cosine curve from the range of 1 to 100? – Homework
- How to reset toggle buttons with a push button
Best Answer