MATLAB: Do I receive a Diagnostic Viewer “Xilinx Zynq-7000 EC” warning when Simulating model in external mode with a Raspberry Pi

diagnostic viewersimulinksupport packagewarningxilinx

The warning reads as follows:

Code Generation  1
Elapsed: 1:22 min
Support package "Xilinx Zynq-7000 EC" has unreadable information file (C:\MATLAB\SupportPackages\R2015b\xilinxzynq7000ec\toolbox\target\supportpackages\zynq\registry\support_package_custominfo.m).

This appears when simulating in external mode with a Raspberry Pi. Can anyone help me diagnose the cause of this warning?

Best Answer

I recommend uninstalling that support package for the moment. You might possibly reinstall it later.

Related Solutions

MATLAB: Does synthesis fail for ZC706 or other high-cost boards when using free Vivado WebPACK edition

This error may be due to a Vivado licensing error. This can be confirmed by opening the Vivado Project File (.XPR) in Vivado IDE, which will reveal the following error on the "Messages" tab:

[Common 17-345] A valid license was not found for feature 'Synthesis' and/or device 'xc7z045'. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.

For example, the no-cost Vivado WebPACK edition only supports a limited set of commercial devices. See the following Xilinx documentation page for a list of all FPGA devices supported by WebPACK:

https://www.xilinx.com/products/design-tools/vivado/vivado-webpack.html#architecture

While Vivado WebPACK supports the low-cost XC7Z020 device used on Zedboard and Xilinx ZC702, an additional license is required for the synthesis of the XC7Z045 Zynq device used on Xilinx ZC706.

MATLAB: Simulink- Zynq-7000 several AXI interfaces in the Simulink peripheral

In order for the new reference design (with the additional AXI interface) to be recognized in the hardware/software workflow, which will then let you generate an interface model with the appropriate interfaces, you need to register the reference design per http://www.mathworks.com/examples/matlab-hdl-coder/12209-define-and-register-custom-board-and-reference-design-for-soc-workflow

Best Answer

Related Solutions

MATLAB: Does synthesis fail for ZC706 or other high-cost boards when using free Vivado WebPACK edition

MATLAB: Simulink- Zynq-7000 several AXI interfaces in the Simulink peripheral

Related Question