I cannot seem to be able to set the ranges properly for the CIO-DAS16/JR block in xPC Target 2.7.2 (R14SP2). The ranges listed in the mask do not match the actual ranges.
MATLAB: Can I not set the ranges properly for the CIO-DAS16/JR block in xPC Target 2.7.2 (R14SP2)
cio-das16/jrrangeSimulink Real-Timevectorxpc
Related Question
- Does the PCI-DAS 1200 board give me an output voltage which is offset by a small value in xPC Target 2.7.2 (R14SP2)
- Does the FIFO bin read block in xPC Target 2.7.2 (R14SP2) not create an additional input port when I select the enable input option
- Is the first letter of the signal name truncated when displayed on a Target Scope in xPC Target 2.7.2 (R14SP2)
- Does the GETXPCPCI function in xPC Target 2.7.2 (R14SP2) list the National Instruments PXI 6052E board as an unknown device
- How to set the duty cycle of the PWM channel for the DM6816 PWM block in xPC Target 2.7.2 (R14SP2)
- Do I not receive an output voltage from the PD2-AO-16/16 board in xPC Target 2.7.2 (R14SP2)
- Is there an error in the documentation for the Adlink 6208 Digital Output in xPC Target 2.7 (R14SP1+)
- Does xPC Target 2.5 (R14) and later support the Watcom C/C++ Version 10.6 compiler
Best Answer