I'm trying to create a Bode plot for the transfer function for a Multiple Feedback Filter. It's a frequency sensitive filter.
The problem is, my bode plot does not have the correct resonant/midfrequency which should be 1000Hz.
I know my transfer function is right because it can be found elsewhere online and using online bode plotters spits out my own transfer function and the correct Bode plot.
My code:
% Bode plot for 1000Hz
R_1 = 1500;R_2 = 3300;R_3 = 12000;C = .047*10^-6;s_numerator = -1/(R_1*C);s2_denom = 1;s1_denom = 2/(R_3*C);s0_denom = (1+(R_1/R_2))/(R_1*R_3*(C^2));H1 = tf ([s_numerator 0],[s2_denom s1_denom s0_denom])% "tf' Creates object representing
bode(H1)grid on
I know H1 gives me the right transfer function but then when I use the bode operation on H1 the plot is all messed up.
MATLAB transfer function and Bode plot:
As you can see, the Bode plot is not centered at as it should be.
Graphed online using OKAWA Electrical Design:
As you can see, the band pass is centered at 1kHz as it should be and its transfer function is nearly the same transfer function as MATLAB gave me:
What is wrong with my MATLAB code?
Best Answer