How to remove this error: Input two of Voltage Measurement block Three-Phase V-I Measurement' is not properly connected to the network.
Best Answer
Make the proper connection...
No can help w/o any other info--the message says the 2nd of the three inputs isn't actually connected to anything so the problem is upstream from there.
There is a bug in SimPowerSystems 4.1 (R14SP2+) when connecting the Machine Measurements Demux block to the Permanent Magnet Synchronous Machine block.
To work around this issue, you can use the Simulink Bus Selector block to access the measurement outputs of the Permanent Magnet Synchronous Machine block. The Simulink Bus Selector block replaced the Machine Measurements Demux block in Simulink version R14SP2+.
Connect the Three-Phase Sine Generator 'abc' port to a demux. The demux should have 1 input and 3 outputs. Connect each of the demux outputs to a 'Controlled Voltage Source' block.
Best Answer